background image

 

7

 
 

 
 
 
 

 

 
 
 
 
 
 
 
 

WARRANTY INFORMATION 

American Fibertek, Inc warrants that at the time of delivery and for a period of five years thereafter the 
products delivered will be free of defects in materials and workmanship. Defective products will be 
repaired or replaced at the exclusive option of American Fibertek. A Return Material Authorization 
(RMA) number is required to send the products back in case of return. All returns must be shipped 
prepaid. This warranty is void if the products have been tampered with. This warranty shall be 
construed in accordance with New Jersey law and the courts of New Jersey shall have exclusive 
jurisdiction over this contract. 

EXCEPT FOR THE FOREGOING WARRANTY, THERE IS NO 

WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR 
OTHERWISE, EXPRESSED OR IMPLIED, WHICH EXTENDS BEYOND THE WARRANTY SET 
FORTH IN THIS AGREEMENT.

 In any event, American Fibertek will not be responsible or liable for 

contingent, consequential, or incidental damages. No agreement or understanding, expressed or 
implied, except as set forth in this warranty, will be binding upon American Fibertek unless in writing, 
signed by a duly authorized officer of American Fibertek. 

 

  

SERVICE INFORMATION 

There are no user serviceable parts inside the unit. 
In the event that service is required to this unit, please direct all inquiries to: 
American Fibertek, Inc. 

Phone: (877) 234-7200 

120 Belmont Drive 

Phone: (732) 302-0660 

Somerset, NJ  08873 

FAX (732) 302-0667 

E-mail: 

[email protected]

 

Summary of Contents for MX2-MM-FX-SC








Reviews: