19
Diagram of heat exchanger cleaning/disassembly of top section
Diagram of Circuit Board Components
.250 Terminal Spade
(back of board)
Thermostat Jumper (factory
Installed) back of board
The ash rake should not be left in the
unit when operating. If you do, make
sure that it is pushed all the way to
the back of the unit and there is no
buildup of fly-ash behind it.
Power
Start
Manual Feed
1 2 3
Low- Med - Max
Feed Adj. Auger Light
L H
Low Voltage
Thermostat hookup
(back of board)
