Focus and Field of View (Zoom) Adjustments
:
Twist the appropriate levers on the side of the
varifocal camera.
Vertical Phase Adjustment
: When using an AC
power supply, this adjustment aligns the camera
phase with the power supply phase.
ALC (Iris) Adjustment
: This is set at the factory
and does not normally require adjustment.
However, if required:
1. Move the AGC DIP switch to the
EX (OFF)
position.
2. View the camera output on a monitor and use
a screwdriver to adjust the ALC dial.
3. Move the AGC DIP switch to the
AGC (ON)
position when the ALC adjustment is
completed.
Reattach the Slot Cover
1. Ensure that the slot cover tongue and grooves
already attached to the dome are centered
over the yoke tabs.
2. Reattach the slot cover by mating the tongue
and grooves together and gently pressing until
you feel a snap (Figure 8).
WARNING
: The tongue and grooves must be
centered over the tabs of the yoke. Failure to
properly attach the cover could result in the
cover falling off during operation. Pull on the
cover to ensure it is securely fastened.
Figure 8. Reattaching the Slot Cover
Gently Push
Groove
Tongue
Yoke
Slot
Cove
Tabs
r
Exploded View
Figure 9. SpeedDome Ultra Drone III Exploded View
2
1
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
10
19
12
10
7
20
21
22
6
23
24
25
26
7
SPEEDDOME ULTRA DRONE III FIXED CAMERA
8200-0581-01, REV. A
INSTALLATION GUIDE
4 of 6
