background image

 

SPEEDDOME ULTRA VII CAMERA DOME CONFIGURATION UTILITY 

8200-0184-09, REV. A 

OPERATOR’S MANUAL SUPPLEMENT 

4 of 13

 

Changing the Auto Iris/Auto 
Focus Resume Setting 

Refer to the SpeedDome Ultra VII Operator’s 
Manual for information about displaying menus and 
changing settings. 

1. Select 

Pan/Tilt/Zoom/Sync Opts

 from the 

Dome Configuration Menu

2.  Move the highlight bar to 

I/F Return to Auto

Change the setting. 

• 

Select 

On

 to enable both resume auto iris 

and resume auto focus. 

• 

Select 

Off

 to disable both resume auto iris 

and resume auto focus. 

• 

Select 

Iris

 to enable resume auto iris only. 

• 

Select 

Focus

 to enable resume auto focus 

only. 

The default setting is 

On

3. Select 

Exit

 to return to the Dome Configuration 

Menu.  

Scan Limits 

Scan Limits

 are two points around the dome’s pan 

axis, which define a surveillance area. When 
active, the scan repeats until interrupted by a 
camera command, preset, pattern, or alarm. 

Figure 4 provides an example of scan limits for a 
dome installed over the edge of a building 
monitoring a parking lot. In this example, the 
building blocks part of the dome’s viewable area. 

Figure 4: Scan Limits example 

 

The dashed circle represents the dome’s field of 
view. The solid line curve represents the scan 
area. By setting the left and right scan limits where 
the building’s wall becomes visible, you ensure that 
only useful video of the parking lot is being 
observed when the scan is active. Once these 
scan limits are programmed you can choose to run 
a smooth scan, stepped scan, or random scan.  

Table 2: Scan Types 

Smooth Scan 

An automated scan that slowly 
pans between the left and right 
scan limits, starting at the left 
scan limit. When the right scan 
limit is reached, the scan 
reverses.  

Stepped Scan 

An automated scan that pans 
slowly pausing briefly every 10° 
between the left and right scan 
limits. Once the right scan limit 
is reached, the scan reverses.  

Random Scan 

An automated scan that pans 
randomly between the left and 
right scan limits, starting at any 
point between the scan limits.  

 

If your controller supports the Quick Set menu 
function, you can program left and right scan limits 
to automate your surveillance activities. The 

Scan 

Limits

 menu option is found on the 

Alarms/Areas/ 

Home/Presets/PZ

 menu. 

Figure 5: Alarms/Areas/Home/Presets/Privacy 
Zones menu 

ALARMS/AREAS/HOME/PRESETS/PZ

SET ALARM ACTIONS

SET ALARM STATES

SET HOME POSITION

SET NORTH POSITION

AREA BOUNDARIES

PRIVACY ZONES

PRESETS

SCAN LIMITS

EXIT

 

Continue with Programming Scan Limits on page 5 
to configure the setting. 

 

Left Scan 

Limit 

Right Scan 

Limit 

Dome 

Buildi

ng 

Summary of Contents for RAS915














Reviews: