American Dynamics Matrix Keyboard, Operator'S Manual

Page: 24 / 44

3-8 ADTTE Matrix Keyboard Operator's Manual
Programming Patterns
*
Tip : Pattern programming is under keyboard lock protection. Refer to the
“Keyboard Lock Feature” in Chapter 2 for information about disabling
the keyboard lock.
You can overwrite an existing pattern using the following procedure.
Use caution to ensure that you do not overwrite a pattern that you want to
keep.
To program a pattern:
1. Enter the camera number and press (Camera button) .
2. Pan and tilt the camera to the starting point of the Pattern. Adjust the zoom and
focus if necessary.
3. Enter the pattern number (1-3) and press
Pattern
.
The pattern number (
P-1
,
P-2
, or
P-3
) appears on the LCD.
4. Press Prog .
5. Move the camera around and create a logical, usable Pattern. The camera can
collectively incorporate up to 98 camera commands, and each Pattern can be up to
6 minutes and 50 seconds long.
6. When you finish the pattern, press
Ack
to save the programming.
Running Patterns
1. Enter the camera number and press
(Camera button)
.
2. Enter the pattern number (1-3) and press
Pattern
.
The pattern number (P-1, P-2, or P-3) appears on the LCD.
3. Do one of the following:
•
Press
Run
to run the pattern one time . The pattern stops when it finishes.
•
Press
Ack
to run the pattern repeatedly. The pattern automatically restarts when
it finishes. To stop the repeating pattern, issue a camera command (pan, tilt,
zoom, focus or iris open/close).