American Dynamics 41
INDOOR MOUNTING OPTIONS
Mount
Description
Compatibility
Construction
Dimensions
Weight
Model
Number
I-Beam Mount
Assembly
This assembly allows the dome to be
suspended from an I-beam; and includes
a clamp, pipe tee nipple, and flange.
The clamp attaches to a 1.25 inch pipe,
provided by the customer, then affixes
to the pendant hardware. The housing
or dome assembly also mounts to the
structure.
SpeedDome
Ultra Series and
IP SpeedDome
Steel and
Galvanized
steel
6 m [max.] x
293 x 127 mm
(20 ft [max.] x 12 x 5 in)
2.9 kg
(6.4 lbs)
RHIUIBM
Indoor Pendant
Mount
This mount suspends a SpeedDome
Ultra or a SpeedDome Optima housing
from a ceiling or horizontal surface. It can
be installed using either 1.25 inch NPT
threaded pipe or rigid conduit, new or
existing, up to 10' (3 meters) in length.
SpeedDome
Ultra, Optima
Series, and IP
SpeedDome
Powder-coated
aluminum and
ABS plastic
115 x 120 x 120 mm
(4 .5 x 5 x 5 in)
1.8 kg
(4 lbs)
RHOPN
Hard Ceiling
Bracket
This bracket enables the Top Hat
housing to be recessed in the ceiling
(requires RHIUTH Top Hat). The bracket
is mounted to the Top Hat and installed
in a hole cut in the ceiling - perfect for
sheet rock, plaster or solid ceilings. The
hard ceiling bracket can be installed
entirely from below the ceiling; the
installer will not have to access the area
above the ceiling to install it.
SpeedDome
Ultra Series
Galvanized
steel
212 x 179 x 56 mm
(8 x 7 x 2 in)
70 kg
(1.6 lbs)
RHIUHC
Fixed Bracket
Used with the RHIUTH Top Hat, this
bracket enables the housing to be
recessed in the ceiling or in a 2-foot drop
ceiling tile. The bracket is mounted to the
Top Hat housing and installed in a hole
cut in the ceiling. The bracket distributes
the weight of the dome and Top Hat
housing across the T-bar framework of
the ceiling. It is also very useful for sheet
rock, plaster, or solid ceilings.
SpeedDome
Ultra Series
Galvanized
steel
180 x 632 x 100 mm
(7 x 24 x 4 in)
1.8 kg
(4 lbs)
RHIUFB
Adjustable
Bracket
Used with the RHIUTH Top Hat, this
bracket enables the housing to be
recessed in drop ceilings that utilize
anything other than 2-foot grids. The
bracket distributes the weight of the
dome and the Top Hat housing across
the T-bar framework of the ceiling and is
adjustable from 632-1219 mm (24-48 in)
SpeedDome
Ultra Series
Galvanized
steel
180 x 1219 x 100 mm
(7 x 48 x 4 in)
2.3 kg
(5 lbs)
RHIUAB
2’ x 2’ Tile
Mount
This mount enables the Top Hat housing
to be recessed in a 2' x 2' drop tile
ceiling. The ceiling tile is removed and
the white tile mount is simply dropped in
its place. A Top Hat housing and plastic
base are included in the kit.
SpeedDome
Ultra Series
Powder-coated
aluminum and
ABS plastic
190 x 607 x 607 mm
(7 x 24 x 24 in)
2.7 kg
(6 lbs)
RHIU2X2M
2’ x 2’ Tile
Pendant
Mount
This mount enables the pendant mount
to be installed in a 2' x 2' drop tile ceiling.
The Top Hat housing/dome assembly
also mounts to the structure. The
mounting kit includes a 2' x 2' plate and
pendant hardware. The plate attaches
to a 1.25 inch pipe, provided by the
customer, then affixes to the Top Hat
housing/dome assembly. If mounting a
SpeedDome Optima with this model,
a RHOPN ceiling pendant mount kit is
required.
SpeedDome
Ultra and Optima
Series
Powder-coated
aluminum and
ABS plastic
47 x 605 x 605 mm
(2 x 23 x 23 in)
5.4 kg
(12 lbs)
RHIU2X2P
2’ x 2’ Tile
Mount Plate
This mount enables the dome to be
recessed in a 2' x 2' drop tile ceiling. The
ceiling tile is removed and the tile mount
is simply dropped in its place.
SpeedDome
Optima Series
Painted
aluminum
47 x 605 x 605 mm
(2 x 23 x 23 in)
1.7 kg
(3.8 lbs)
RH2X2
Indoor Mounts and Mount Adapters
