(1) Supported by SpeedDome Ultra VII or SpeedDome Ultra 8.
(2) Some digital video recorders, video servers, or similar products may lose color information when UTP cable distances exceed 180 m (600 ft).
Alarm Clearance Methods
• Acknowledge:
Alarms must be manually acknowledged.
• Time Out:
Alarms are automatically cleared after a
pre-defined dwell time of 2 to 99 seconds. Alarms can also
be manually acknowledged.
• Transparent:
Alarms are cleared after the alarm contact
returns to its neutral state. If the contact returns to this state
before the transparent dwell time of 2 to 99 seconds, then
the alarm remains active for that predefined period. Alarms
can also be manually acknowledged.
events
An event is a message that is passed from one matrix to
itself or other matrix systems (up to 3 on an ADnet network).
Up to 255 events can be defined and each system can have
a predefined event response. In addition, events can be
generated from any ControlCenter 200 or 300 keyboard to
produce a system response.
system Partitioning
Defining authorized access to keyboards, video inputs and
video outputs further enhances system flexibility. System
partitioning includes the following:
• Keyboard-to-Monitor Access:
Restricts selected
keyboards from accessing selected video outputs.
• Keyboard-to-Camera Access:
Restricts selected
keyboards from calling or controlling selected video inputs.
• Keyboard-to-Camera Control Access:
Allows selected
keyboards to view certain cameras but restricts those
keyboards from controlling the cameras.
Keyboard Priority Operation
Keyboards can be assigned one of 8 levels of priority control
of remote camera sites. Level 1 has highest priority for
control of cameras. Up to 4 keyboards may simultaneously
control PTZ devices.
Model Numbers
ADMPLT16 . . . . . . . . . . . . MegaPower LT, 16 inputs x 4 outputs,
(120/230 VAC, NTSC/PAL)
ADMPLT16C2 . . . . . . . . . . MegaPower LT, 16 inputs x 4 outputs,
(120/230 VAC, NTSC/PAL) with
ControlCenter 200 keyboard
ADMPLT16C3 . . . . . . . . . . MegaPower LT, 16 inputs x 4 outputs,
(120/230 VAC, NTSC/PAL) with
ControlCenter 300 keyboard
ADMPLT32 . . . . . . . . . . . . MegaPower LT, 32 inputs x 8 outputs,
(120/230 VAC, NTSC/PAL)
ADMPLT32C2 . . . . . . . . . . MegaPower LT, 32 inputs x 8 outputs,
(120/230 VAC, NTSC/PAL) with
ControlCenter 200 keyboard
ADMPLT32C3 . . . . . . . . . . MegaPower LT, 32 inputs x 8 outputs,
(120/230 VAC, NTSC/PAL) with
ControlCenter 300 keyboard
Directset
1
Allows the operator to quickly access and change dome
camera settings either via an on-screen selection or simple
keyboard command, without the need to access the dome
menus. Features like wide dynamic range, day/night and
dome information screens can be easily accessed without
compromising other dome settings.
Dome Ping
This utility allows the administrator to verify the integrity of
the communication between the matrix and the dome on
both SensorNet and the AD-UTC protocol.
Internal Video Loss Detection
Video loss detection is standard on all video inputs. If such
a camera is selected, a red screen will appear with a “Video
Loss Camera” message.
On-Board Diagnostics
Built-in diagnostics allow the user to determine the status of
the system’s internal components. LEDs on the front of the
unit clearly indicate power status and system health.
Optional Accessories
Accessory
Description
ADCC0200,
ADCC0300
ControlCenter
Keyboards
Full system keyboards allow for video switching,
pan/tilt control, dome control, auxiliary control,
recorder control, multiplexer control and system
programming. The keyboards support bi-directional
communication with the matrix via ADnet.
ADCC1100
MegaPower
ControlCenter
Keyboard
Full system, smart card enabled keyboards allow
for video switching, pan/tilt control, dome control,
auxiliary control, macro control, user partitioning and
access, recorder control and system programming.
The keyboards support bi-directional communication
with the CPU via RS-232 ASCII commands.
ADTTE Touch Tracker
Keyboard
Full system keyboards allow for video switching, pan/
tilt control, dome control, auxiliary control and system
programming. The keyboards support bi-directional
communication with the CPU via RS-232 ASCII.
AD2088 and AD2089
Keyboards
Full system keyboards allow for video switching, pan/
tilt control, dome control, auxiliary control, macro
control, recorder control, and system programming.
The keyboards support bi-directional communication
with the CPU via RS-232 ASCII commands.
AD2081, AD2081-1
Port Expander
Expands one RS-232 port on a system into 4 ports.
This provides connections to multiple system
keyboards.
RCSN422, SensorNet-
to-RS-422 Converter
Control of RS-422 domes using the RCSN422
SensorNet-to-RS-422 converter.
ADACTP01BNC
Twisted Pair Video
Adapter
A passive transmission device that transmits video
or video with Up-The-Cable (AD-UTC) dome control
signals over Unshielded Twisted Pair (UTP) cables,
point-to-point, for distances up to 300 m (1,000 ft)
2
.
These adapters use Category 2-6 twisted pair wires
to transmit the video and dome control signals
and do not require power.
VRCMKIT Cable
Brackets
Each kit contains 3 cable management brackets.
