American Dynamics ADCI625-P221, Configuration And User'S Manual

Page: 91 / 142

Networking Menu
7-81
7
SMTP
Configure the SMTP settings to allow e-mail alerts to be sent from the dome when an alarm is
triggered.
Configure SMTP
SMTP settings must be configured to enable email alerts when using alarms.
Procedure 7-7 Configure SMTP Settings
Step Action
1
Select
SMTP
from the
Networking
menu.
The SMTP tab displays.
2
Enter the IP Address of the mail server in the
Mail Server
text box.
3
Enter the server port in the
Server Port
text box.
The default setting is 25.
4
Enter the from address in the
From Address
text box.
5
Enter the address to send email alerts to in the
Send Email to
text box.
6
Select the
Use authentication to log on to server
check box to allow authentication
details to be entered.
Or
Deselect the
Use authentication to log on to server
to disable authentication.
The default setting is ‘Disabled’.
7
If Use authentication to log on to server check box has been selected:
a
Enter the username in the
Username
text box.
b
Enter the password in the
Password
text box.
8
Select
Apply
to save the settings.
Note
Refer to Procedure 7-8 Test the SMTP Settings to confirm that the SMTP settings
are working as expected.
- End -
Test SMTP Settings
Test the SMTP settings that have been configured in Procedure 7-7 Configure SMTP Settings.