American Dynamics ADCI625-P221 Configuration And User'S Manual Download Page 27

Page: 27 / 142

Web Configuration

3-17

Procedure 3-7 Controlling Pan/Tilt via Click and Drag using the Live Video
Pane

Step Action

Select

to start the live web video feed.

The live video pane will display the current camera view.

Move the cursor to the pan and tilt quick control icon

in the center of the video pane.

Click and drag the cursor to set the direction and speed of the camera.

• A red arrow will appear showing the direction of camera movement.

• The camera’s movement speed increases as the arrow is moved further from

the cursor origin mark.

- End -

Zooming Using the Mouse Scroll Wheel

Control the zoom function using a scroll wheel mouse.

Procedure 3-8 Zooming via the mouse scroll wheel using the Live Video
Pane

Step Action

Select

to start the live web video feed.

The live video pane will display the current camera view.

Refer to Controlling the camera via Camera Controls or Procedure 3-7 Controlling

Pan/Tilt via Click and Drag using the Live Video Pane to point the camera at the target.

Scroll the mouse wheel upwards (zoom in) and downwards (zoom out).

- End -

Double-click to Center using the mouse

Click on the live video pane to automatically center the camera display.

Procedure 3-9 Activate Double-click to Center using the mouse

Step Action

Select

to start the live web video feed.

The live video pane will display the current camera view.

Using the mouse, double-click on the area of interest in the live video pane.

Summary of Contents for ADCI625-P221















































































































































Search results

Summary of Contents for ADCI625-P221

Reviews:

Brands by name

Popular brands

American Dynamics ADCI625-P221, Configuration And User'S Manual

Search results

Summary of Contents for ADCI625-P221

Reviews:

Brands by name

Popular brands