Parts Descriptions
1-2
Discover 700 Series Outdoor IR Bullet Camera
Precautions
Installation of this device shall be performed by qualified personnel in accordance with all local
regulations and good installation practices.
To prevent damage to your camera or injury to yourself or to others, read and comply with the safety
precautions as follows:
1. Never attempt to disassemble or modify the camera. Any modification could lead to damages that
are not covered by the guarantee.
2. Make sure the power source is switched off and disconnected before installation. Refer servicing
to qualified personnel only.
3. To prevent fire or electrical shock, use only regulated power supply and the wiring should be used
for the appropriate input terminal.
4. Do not expose or operate the camera in wet areas. Moisture may damage the camera and also
increase the danger of electrical shock.
5. Do not attempt to aim the camera at the sun or other extremely bright objects. This may cause
damage to the CCD and the void of warranty.
6. Do not touch the lens or the CCD by hands while installing or adjusting the camera. This may
cause damage to the camera.
