8200-0206-12 Rev. A
1
2
Major operating controls and functions
1. 12Vdc
Input
Terminal
2. Video Output Connector (VIDEO OUT)
Connections
1. Connect the video terminal of the camera (VIDEO) and the video input terminal of the video monitor with
a 75-ohm coaxial cable.
2. Connect the power terminal of the camera to a 12VDC + 10% regulated power supply.
Standard Accessories
1. Main Body * 1
2. DC-BNC Connector * 1
3. Instruction Manual * 1
1. 12Vdc Input Terminal -Connection to the power cord:
To connect camera to a 12Vdc+ 10% regulated power supply.
2. Video Output Connector (VIDEO OUT) - Connect ion to video input:
To connect camera to 75-Ohm video terminal with standard 75-Ohm
coaxial cable
Warning
--
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Canadian ICES-003 and part
15
of t
he FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation
of
this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
American Dynamics
Tyco Safety Products
6600 Congress Ave.
Boca Raton, Florida 33487
Telephone: 561-912-6000
