background image

QA303C

This product generates and uses radio frequency

energy and if not installed and used properly, that is,

in strict accordance with the manufacturer's

instructions, may cause interference to radio and

television reception.  It has been type tested and found

to comply with the limits for a Class B computing

device in accordance with the specifications in Part 15

of FCC Rules, which are designed to provide reasonable

protection against such interference in a residential

installation.  However, there is no guarantee that

interference will not occur in a particular installation.

If this product does cause interference to radio or

television reception, which can be determined by

turning the product off and on, the user is encouraged

to try to correct the interference by one or more of

the following measures:

)

- Reorient the product.

)

- Relocate the product with respect to the receiver.

)

- Move the product away from the receiver.

)

- Plug the product into a different outlet so that the 

)

product and receiver are on different branch circuits.

  

If necessary, the user should consult the dealer or an

experienced radio/television technician for additional

suggestions.  The user may find the following bookket

prepared by the Federal Communications Commission

helpful: "How to Identify and Resolve Radio-TV

Interference Problems."  This booklet is available from

the U.S. Government Printing Office, Washington, DC

20402, Stock No. 004-000-00345-4.

W

W

W

WA

A

A

ARRRRNN

N

NIIIINN

N

NGGG

G

To reduce the risk of fire or shock hazard, do 

not expose this product to rain or moisture.

The installation of this product should be made by qualified

service personnel and should conform to all local codes.

AMERICAN

DYNAMICS

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, 

DO NOT REMOVE COVERS (OR BACK) .

NO USER-SERVICEABLE PARTS INSIDE.  

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

!

!

IIIIN

N

N

NSSSSTTTTA

A

A

ALLLLLLLLA

A

A

ATTTTIIIIO

O

O

ONN

N

N    A

A

A

ANN

N

NDD

D

D    SSSSEEEERRRRV

V

V

VIIIICCCCEEEE

If you require information during installation of this

product or if service seems necessary, contact the

American Dynamics Repair and Service Department at

(800) 442-2225.  You must obtain a Return Authorization

Number and shipping instructions before returning any

product for service.

Do not attempt to service this product yourself.  Opening or

removing covers may expose you to dangerous voltages or

other hazards.  Refer all servicing to qualified personnel.

M

M

M

MA

A

A

AIIIINN

N

NTTTTEEEENN

N

NA

A

A

ANN

N

NCCCCEEEE

User maintenance of this unit is limited to external cleaning

and inspection.  For specific recommendations refer to the

IMPORTANT SAFEGUARDS sheet packaged with this product.

UUU

UNN

N

NPPPPA

A

A

ACCCCKKK

KIIIINN

N

NGGG

G    A

A

A

ANN

N

NDD

D

D    IIIINN

N

NSSSSPPPPEEEECCCCTTTTIIIIO

O

O

ONN

N

N

Unpack carefully.  This is an electronic product and should

be handled as such.  Compare the items received with the

packing list with your order.

Be sure to save:

1.  The shipping cartons and insert pieces.  They are the    

)

     safest material in which to make future shipments of 

     the product.

2.  The IMPORTANT SAFEGUARDS sheet.

3.  These Installation and Operating Instructions.

The lightning flash with arrowhead

symbol, within an equilateral

triangle, is intended to alert the

user to the presence of uninsulated

"dangerous voltage" within the

product's enclosure that may be of

sufficient magnitude to constitute a

risk of electric shock to persons.

The exclamation point within an

equilateral triangle is intended to

alert the user to the presence of

important operating and maintenance

(servicing) instructions in the

literature accompanying the product.

Summary of Contents for AD1475A





















Reviews: