Page 1: ......
Page 2: ......
Page 3: ...ount the camera assembly to the slide using 1 4 20 bolt and tighten Install the camera into the housing selecting the proper slide height in order to center the lens in housing window Tighten the camera slide 2 mm allen wrench to prevent movement of the camera during operation Wiring Installation Route cables through rear of housing using the two com pressing cable entries Tighten compression fitt...
Page 4: ...5 14 Weatherproof dustproof housing with light beige powder coat enamel finish Supplied in 14 inch lengths 1335 14S Same as above with sunshield 1335 14SH24 Same as above with sunshield and 24 volt heater installed 1335 18SH24 120 V heaters can be substituted for 24V heater by specifying 120 in the housing model number i e 1335 14SH120 General Purpose 1337 14 Weatherproof dustproof housing with na...
