AD1476
SETUP PROGRAMMING
TITLES
The Titles menu permits the entry of separate titles for each Video
Input.
Figure 19 - Titles Menu
To enter on-screen titles for Video Inputs 1 through 8, select the
CAMERA INPUT entry using the up or down arrow pushbuttons to
position the cursor at the desired camera title.
Using the left/right arrow pushbuttons, position the cursor at the
character to be entered or changed. Eight characters may be entered
for each title. Use the + and - pushbuttons to increment or decrement
the character at that position. The available alphanumeric characters
are:
ABCDEFGHIJKLMNOPQRSTUVWXYZO1 23456789_ •: ( ? ! ' . )
+-*/=&,
When all entries are displayed as desired, press NEXT to store the
displayed entries and advance to the ALARMS menu.
ALARMS
The Alarms menu is used to set the desired alarm configuration.
NO/NC:
Displays the normal (not alarmed) status of the external
alarm devices connected to the Alarm Inputs. The alarm numbers 1-8
are displayed above each status entry in the menu.
• O = Normally Open
• C = Normally Closed
• X = Disabled - Alarms from this input ignored.
Use the arrow pushbuttons to position the cursor at the status to be
changed. Use the + or - pushbuttons to change the entry until the
desired status is shown.
Clear:
Defines the type of alarm clearance.
• I (Instant): Clears alarms when the alarm input clears.
• D (Delay): Holds alarms 20 seconds after the input clears.
• A (Acknowledge): Holds alarms until acknowledged.
Use the arrow pushbuttons to position the cursor at the CLEAR entry.
Use the + or - pushbuttons to change the entry until the desired
clearance type is shown.
Freeze: Establishes whether a Quad Display is, or is not, frozen at the
moment of first alarm.
IN = Frozen
OUT = Not Frozen
Use the arrow pushbuttons to position the cursor at the FREEZE entry.
Use the + or - pushbuttons to change the value.
Seq Quad:
Establishes whether the Quad Display, as programmed on
the Sequences menu, is or is not sequenced with alarmed cameras.
IN = Sequence
OUT = Not Sequenced
Use the arrow pushbuttons to position the cursor at the SEQ QUAD
entry. Use the + or - pushbutton to change the value.
When all entries are displayed as desired, press NEXT to store the
displayed entries and advance to the TIME & DATE Menu.
Figure 20: Alarms Menu
