American DJ
®
- www.americandj.com - X-Color LED Plus Instruction Manual Page 11
American DJ
®
- www.americandj.com - X-Color LED Plus Instruction Manual Page 12
Operating Modes: The X-Color LED Plus can operate in three
different modes. This next section will detail the differences in
the operating modes.
• Stand alone mode -
The unit will react to sound, chasing through the built-in programs.
• Master/Slave mode -
You can daisy chain up to 16 units together to get a synchronized
light show
without the need of an external controller. The units
will
react to sound chasing through the several built-in programs.
• DMX control mode -
This function will allow you to control
each individual fixtures traits
with a standard DMX-512 controller such as the Elation
®
Show
Designer.
™
Universal DMX Control:
This function allows you to use a Elation
®
universal DMX-512 controller to control the chases and patterns,
dimmer and strobe. A DMX controller allows you to create unique
programs tailored to your individual needs.
1. The X-Color LED Plus is a three DMX channel DMX fixture. See
page
13 for detailed description of the DMX traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 5-7 as well as the set-up specifications that are includ-
ed with your DMX controller.
3. Use the controller’s faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instruction on page 8 to set the DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
7. For help operating in DMX mode consult the manual included
with your DMX controller.
Sound Active Mode:
This mode allows either single unit or several
units linked together, to run to the beat of the music.
1. Tap the MENU button until
“
SOUN
” is displayed, and press
ENTER. Tap the UP or DOWN buttons so that “
ON
” is dis
played and press ENTER.
2. The optional
UC3 Controller
(not included)
may be used to con-
trol different functions including blackout.
X-Color LED Plus
Operation
exit
RSET
- Use this function to reset the unit.
1. Tap the MENU button until “
RSET
” is displayed, press ENTER.
2. The fixture will now reset
.
X-Color LED Plus
System Menu
