manualshive.com logo in svg

American DJ Water Column/4, Assembly Instructions Manual, Page: 1 / 7

Share
Download
American DJ Water Column/4 Assembly Instructions Manual Download Page 1

SPECIFICATIONS:
MODEL - 

Water Column™

Weight:

16 lbs.Without water

Size:

53.5” x 11” x 10"

Lamps:

EXN 12V 50W 

Fuse:

3A

Supply  Voltage:  

120V

Tube capacity: 

Approx. 2.5 gal

Tube Dimensions: 

48” X 3.25”

Colors: 

8 plus White

American DJ

®

Assembly Instructions

Affordable Quality Lighting Products from

American DJ

®

Los Angeles, CA. 90058 USA  Page 1

CAUTION!

Read instructions before installing

or plugging unit in.

HALOGEN LAMP WARNING!

This fixture is fitted with halogen
lamps which are highly suscepti-
ble to damage if improperly han-
dled. Never touch lamp with bare
fingers as the oil from your
hands will shorten lamp life.
Also, never move fixture until
lamp has had ample time to cool.
Remember, lamps are not cov-
ered under warranty conditions.

INTRODUCTION

Congratulations on your purchase of the American DJ Water Column/4™. This unique piece adds a
dazzling effect to Clubs, Bars, Bowling Centers, and Roller Rinks. The Water Column/4™ is an intelli-
gent color changer that can be operate with a standard DMX controller or in sound active and  stand
alone modes. This unit can be set to scroll through it’s 8 colors (plus white), or set to a particular color
through the use of a standard DMX controller such as the American DJ
DMX Operator™. This unit is sound active and the bubble intensity can
be adjusted.

ASSEMBLY INSTRUCTIONS

The  Water Column/4™ is shipped in two boxes, one (1) box contains
the water tube and the other contains the water column base (see figure
1), warranty card, and owners manual. Carefully unpack the base and
water tube from their respective boxes. 

Water Column/4

™

Figure 1

Summary of Contents for Water Column/4








Reviews:

No comments