American DJ
®
- www.americandj.com - VioROLL LED Instruction Manual Page 11
American DJ
®
- www.americandj.com - VioROLL LED Instruction Manual Page 12
press ENTER. Either Yes or No will be displayed.
2. To activate Blackout tap the UP or DOWN buttons until Yes is
displayed, press ENTER to confim and exit. The fixture will now
be in Blackout mode. To deactivate Blackout mode, select No
and press Enter.
LED
-
With this function you can have the LED display turn off
after 10 seconds.
1. Tap the MENU button until “
LED
” is displayed, press ENTER.
2. The display will show either “
ON”
or
“OFF
”. Press the UP or
DOWN buttons to select “
ON
” to keep the LED display on at
all times, or “
OFF
” to switch to have the LED display switch off
after 10 seconds.
3. Press ENTER to confirm.
DISP
-
This function will reverse the display 180º.
1. Tap the MENU button until “
DISP
” is displayed, press ENTER.
2. Press ENTER to “flip” the display. Press ENTER to “flip” it
again. Press ENTER when you have made your desired setup.
PAN
-
Pan Inversion
1. Tap the either the MENU button until “
PAN
” is displayed,
press ENTER. Either Yes or No will be displayed.
2. To activate the Pan inversion tap the UP or DOWN buttons
until
YES
is displayed, press ENTER to confim and exit. To
deactivate Pan inversion, select No and press Enter.
BARR
-
Barrel Inversion
1. Tap the either the MENU button until “
BARR
” is displayed,
press ENTER. Either Yes or No will be displayed.
2. To activate the Barrel inversion tap the UP or DOWN but-
tons until
YES
is displayed, press ENTER to confim and exit. To
deactivate Tilt inversion, select No and press Enter.
TEST
- This function will run a self test program.
1. Tap the MENU button until “
TEST
” is displayed, press ENTER.
2. The fixture will now run a self test.
FHRS
- With this function you can display the running time of
the unit.
1. Tap the either the MENU button until “
FHRS
” is displayed,
press ENTER.
2. The display shows the running time of the unit. Press MENU
to exit.
VER
- With this function you can display the version software
of the fixture.
1. Tap the MENU button until “
VER
” is displayed, press ENTER.
2. The software version will now be displayed. Press MENU to
exit
RSET
- Use this function to reset the unit.
1. Tap the either the MENU button until “
RSET
” is displayed,
press ENTER.
2. The fixture will now reset.
VioROLL LED System Menu & Operation
VioROLL LED System Menu & Operation
