©
American DJ
®
- www.americandj.com - UV Panel HP™ Instruction Manual Page 3
UV Panel HP™
Precautions
• 4 Bright 40 Watt Ultra-Violet Lamps For a Combined Total of a 160
Watts
• Lamp (LL-UVP40)
• Easy Lamp Replacement
• Built-In Hanging Yoke
• Protective Plexiglass Cover
UV Panel HP™
Features
UV Panel HP™
Warranty Registration
The UV Panel HP™ carries a one year (365 days) limited warranty.
Please fill out the enclosed warranty card to validate your purchase.
All returned service items whether under warranty or not, must be
freight pre-paid and accompany a return authorization (R.A.) num-
ber. The R.A. number must be clearly written on the outside of the
return package. A brief description of the problem as well as the R.A.
number must also be written down on a piece of paper included in
the shipping carton. If the unit is under warranty, you must provide a
copy of your proof of purchase invoice. You may obtain a R.A. num-
ber by contacting our customer support team on our toll free custom-
er support number. All packages returned to the service department
not displaying a R.A. number on the outside of the package will be
returned to the shipper.
• Keep the outside of this device dry at all times. Do not spill water or
other liquids into or on to your unit. To prevent fire or shock hazard,
do not expose this product to rain or moisture.
• This unit is designed for interior use only. Do not use this unit out
doors. Use of product outdoors will void the warranty.
• Be sure that the local power outlet match that of the required volt-
age for your unit.
• Never attempt to operate this unit if the power cord becomes frayed
or broken.
• Never attempt to operate this unit, if it becomes damaged in any
way.
• Do not attempt to remove or break off the ground prong from the
electrical cord. This prong is used to reduce the risk of electrical
shock and fire in the rare case of an internal short.
©
American DJ
®
- www.americandj.com - UV Panel HP™ Instruction Manual Page 4
UV Panel HP™
Operation
Power Supply:
Before plugging your unit in, be sure the source
voltage in your area matches the required voltage for your American
DJ
®
UV Panel HP™ before attempting operation.
General Operation:
This fixture is designed to operate as a stand
alone unit. It has been tested and the lamp has been installed at the
factory there is no assembly necessary. The UV Panel HP™ is ready
to be plugged in, out of the box. “Flip” the power switch to the “on”
position and the lamp will immediately begin to glow.
Please carefully read and understand the instructions in this manual
thoroughly before attempting to operate this unit. These instructions
contain important safety information regarding the use and mainte-
nance of this unit. Please keep this manual with the unit, for future
reference.
UV Panel HP™
General Instructions
Fixture Cleaning:
Due to fog residue, smoke, and dust cleaning the
internal and external lenses should be carried out periodically to opti-
mize light output. Cleaning frequency depends on the environment
in which the fixture operates (I.e. smoke, fog residue, dust, dew).
In heavy use we recommend cleaning on a monthly basis. Periodic
cleaning will ensure longevity, and crisp beam output.
1. Use normal glass cleaner and a soft cloth to wipe down the out-
side casing.
2. Use a soft brush to clean out the air vents
3. Clean the external optics with glass cleaner and a soft cloth every
20 days.
4. Clean the internal optics with glass cleaner and a soft cloth every
30-60 days.
5. Always be sure to dry all parts completely before plugging the unit
back in.
UV Panel HP™
Cleaning
