©
American DJ Supply
®
- www.americandj.com - Tri Gem LED™ Instruction Manual Page 4
©
American DJ Supply
®
- www.americandj.com - Tri Gem LED™ Instruction Manual Page 3
Tri Gem LED™
Operation
Introduction:
The American DJ
®
Tri Gem
LED™
is a LED moon-flower
effect. This fixture is designed for mobile DJ’s, clubs, bands, roller
rinks and any arena that requires a compact, light weight, easy to use
unit.
General Operation:
This fixture is designed to operate as a stand
alone unit, there is no need of a controller. It has been tested and there
is no assembly necessary. The Tri Gem LED™ is ready to be plugged
in out of the box, there is no power switch. Plug the unit in to a match-
ing power outlet or into a power pack. Light output will be immediate
when the unit is powered on. The unit must receive a sound source to
operate normally.
This unit comes with a 3-way multi-operating switch located on the
rear of the unit. The unit has three (3) different operating modes;
Static, Sound Active, and Continuous. All settings must recieve a
sound source to operate normally.
Tri Gem LED™ Fuse Replacement
Tri Gem LED™
Warranty Registration
The Tri Gem LED™ carries a three year (1095 days) limited warranty.
Please fill out the enclosed warranty card to validate your purchase.
All returned service items whether under warranty or not, must be
freight pre-paid and accompany a return authorization (R.A.) num-
ber. The R.A. number must be clearly written on the outside of the
return package. A brief description of the problem as well as the R.A.
number must also be written down on a piece of paper and included
in the shipping container. If the unit is under warranty, you must pro-
vide a copy of your proof of purchase invoice. You may obtain a R.A.
number by contacting customer support at (800) 322-6337.
Tri Gem LED™
Features
• Includes Built-In Hanging Yoke
• Sound-Active
• Light Weight
• LED Output Similar to 250W Lamp
To optimize the performance of this product, please read these
operating instructions carefully to familiarize yourself with the basic
operations of this unit. These instructions contain important safety
information regarding the use and maintenance of this unit. Please
keep this manual with the unit, for future reference.
Tri Gem LED™
General Instructions
Fuse Replacement:
First unplug the power. The fuse holder is
located at the rear of the unit next to the power cord. Using a flat-
head screw driver unscrew the fuse holder. Remove the bad fuse and
replace with a new one.
