background image

•   Do not spill water or other liquids  into or on to your unit.

•   Be sure that the local power outlet match that of the required voltage 

   for your unit.

•   Do not attempt to operate this unit if the power cord has been frayed 

   or broken. 

•   Do  not  attempt  to  remove  or  break  off  the  ground  prong  from 

   the electrical cord. This prong is used to reduce the risk of electrical 

   shock and fire in case of an internal short.

•   Disconnect from main power before making any type of connection.

•   Do  not  remove  the  top  cover  under  any  conditions.  There  are  no 

   user serviceable parts inside.

•   Never plug this unit in to a dimmer pack

•   Always be sure to mount this unit in an area that will allow proper 

   ventilation. Allow about 6” (15cm) between this device and a wall.

•   Do not attempt to operate this unit, if it becomes damaged in any way.

•   Never operate this unit when it’s cover is removed.

•   To reduce the risk of electrical shock or fire, do not expose this unit 

   rain or moisture

•   This unit is intended for indoor use only, use of this product outdoors 

   voids all warranties.

•   During long periods of non-use, disconnect the unit’s main power.

•   Always mount this unit in safe and stable matter.

•   Power  Cord  Protection  -  Power  supply  cords  should  be  routed 

   so  that  they  are  not  likely  to  be  walked  on  or  pinched  by  items 

   placed upon or against them, paying particular attention to cords at

   plugs, convenience receptacles, and the point where they exit from

   the appliance.

•  Cleaning  -The  fixture  should  be  cleaned  only  as  recommended  by 

   the manufacturer.

•   Heat  -The  appliance  should  be  situated  away  from  heat  sources 

   such as radiators, heat registers, stoves, or other appliances (includ-

   ing amplifiers) that produce heat.

•   The fixture should  be serviced by qualified service personnel when:

    A. The power-supply cord or the plug has been damaged.

    B. Objects have fallen, or liquid has been spilled into the appliance.

    C. The appliance has been exposed to rain or water.

    D. The appliance does not appear to operate normally or exhibits a 

     

  

 marked change in performance.

 Star Winder™    

 

       Safety Precautions

©

American DJ Supply

® 

  www.americandj.com   Star Winder™ Instruction Manual Page 3

©

American DJ Supply

® 

  www.americandj.com   Star Winder™ Instruction Manual Page 4

 Star Winder™    

 

 

 

   Unpacking

Every Star Winder™ has been thoroughly tested and has been shipped 

in perfect operating condition. Carefully check the shipping carton for 

damage that may have occurred during shipping. If the carton appears 

to be damaged, carefully inspect your fixture for any damage and be 

sure all equipment necessary to operate the unit has arrived intact. In 

case damage has been found or parts are missing, please contact our 

toll free customer support number for further instructions, please do not 

return the unit to your dealer.

•   Vibrant Color Wheel.

•   Linkable.

•   Audio Sensitivity Knob.

•   Uses One DMX Channels.

•   Sound-Active.

•   DMX-512 Protocol Compatible.  

•   Full Focusing.

•   Master/Slave Built-In Programs.

•   Fan Cooled.

•   Optional MINI/C Blackout Controller.

 Star Winder™    

 

 

 

  

  

 Features

 Star Winder™    

 

 

 

     Contents

Introduction...................................................................................2

Unpacking....................................................................................3

Features..................................................................................3

Safety Precautions.......................................................................4

Set-Up................................................................................5

DMX  Addressing.............................................................6

Linking...............................................................................7

Controls  &  Functions..........................................................8

Operation..............................................................................9

Lamp  Replacement..............................................................11

Focusing.............................................................12

Cleaning................................................................12

Dip  Switch  Charts...............................................................13

Warranty.........................................................................15

Summary of Contents for Star Winder









Reviews: