background image

©

American DJ

®

 - www.americandj.com - Ruby Royal Instruction Manual Page 4

©

American DJ

®

 - www.americandj.com -  Ruby Royal Instruction Manual Page 3

Please carefully read and understand the instructions in this manual 

thoroughly before attempting to operate this unit. These instructions 

contain important safety information regarding the use and mainte-

nance of this unit. Please keep this manual with the unit, for future 

reference.

CAUTION IMPORTANT! When installing this projector, make sure 

that it is mounted in a manner that prevents the audience from 

looking directly into the beam, and the beam from striking the 

audience.

 Ruby Royal  

 

 

           General Instructions

 Ruby Royal  

 

 

             Safety Precautions

Safety Issues: This unit may “pop” the fuse if the maximum allotted 

load of 2 amps is reached.

•  To reduce the risk of electrical shock or fire, do not expose this unit

     rain or moisture.

•  Do not spill water or other liquids  into or on to your unit.

•  Do not attempt to remove or break off the ground prong from the

    electrical cord. This prong is used to reduce the risk of electrical  

   shock and fire in case of an internal short. Do not attempt to oper-

   ate this unit if the power cord has been frayed or broken.

•  Disconnect from main power before making any type of connection.

•   Do not remove the cover under any conditions. There are no user  

   serviceable parts inside.

•  Always be sure to mount this unit in an area that will allow proper  

   ventilation. Allow about 6” (15cm) between this device and a wall.

•  Do not attempt to operate this unit, if it becomes damaged.

•  This unit is intended for indoor use only, use of this product out-

   doors voids all warranties.

•  During long periods of non-use, disconnect the unit’s main power.

•  Always mount this unit in safe and stable matter.

•  Power cords should be routed so they are not likely to be walked  

   on, pinched by items placed upon or against them.

• Cleaning -The fixture should be cleaned only as recommended by  

   the manufacturer. See page 19 for cleaning details.

•  Heat -The appliance should be situated away from heat sources  

   such as radiators, heat registers, stoves, or other appliances    

   (including amplifiers) that produce heat.

•  The fixture should be serviced by qualified service personnel when:

    A.  The power-supply cord or the plug has been damaged.

    B.   Objects have fallen, or liquid has been spilled into the unit.

    C.  The unit has been exposed to rain or water.

    D.   The unit does not appear to operate normally or exhibits a

            marked change in performance.

•  150mW Red Laser & 150mW Violet Blue Laser

•  6 Channel DMX Control

•  3 Operating Modes - Sound Active, Show Mode, & DMX Control 

•  20 Laser Patterns

•  Digital Display for Address and Function Setting

•   UC3 Controller (Not Included)

•   Run as Stand Alone unit or in a Master-Slave Configuration

•   Power Cord Daisy Chain up to 18 units max. See page 16

 Ruby Royal  

 

 

                              Features

 Ruby Royal             

                   Warranty Registration

The Ruby Royal carries a 90 day limited warranty. Please fill out the 

enclosed warranty card to validate your purchase. All returned ser-

vice items whether under warranty or not, must be freight pre-paid 

and accompany a return authorization (R.A.) number. If the unit is 

under warranty you must provide a copy of your proof of purchase 

invoice. Please contact American DJ

®

  customer support for a R.A. 

number.

!

!

LASER RADIATION  

AVOID 

DIRECT EYE EXPOSURE

Maximum output <5 mW

Wavelength: 405, 532nm

Class IIIa laser product

This device complies with 21 CFR

 chapter I,

Subchapter J, or CFR 1040.10 and

 1040.11

The unit should be mounted using a mounting clamp (not provided), 

affixing it to the mounting bracket that is provided with the unit. 

Always ensure that the unit is firmly fixed to avoid vibration and slip-

ping while operating. Always ensure that the structure to which you 

are attaching the unit is secure and is able to support a weight of 10 

times the unit’s weight. Also always use a safety cable that can hold 

12 times the weight of the unit when installing the fixture.

The equipment must be installed by a professional, and it must be 

installed in a place where it is out of the reach of people’s grasp.

 Ruby Royal             

                                    Installation

Summary of Contents for Ruby Royal













Reviews: