American DJ® www.americandj.com - RGBW4C Page 8
American DJ® www.americandj.com - RGBW4C Page 7
RGBW4C Controls and Functions
RGBW4C Controls and Functions
1. FIXTURE SELECTION - The RGBW4C can control up to 8 LED fixtures.
Press one of the buttons and the corresponding LEDs above the button
will light indicating which LED fixture can be controlled.
Example: Press the 1/5 button one time and the left LED will light indicating
that fixture 1 can now be controlled. Press the button a second time and
the right LED will light, indicating that fixture 5 can now be controlled. Press
the button a third time and both LEDs will light, indicating that both fixtures
can now be controlled. When you press the button the fourth time both
LEDs will turn off, indicating that you cannot control the fixtures.
2. CHASE BUTTON - Press this button to activate chase mode. Press
any of the color buttons in the COLORS/CHASES grid (14) to select
your desired chase.
3. BLACKOUT - Activates and deactivates blackout mode
4. COLOR MACROS - Press this button to activate the COLOR
MACROS. The COLOR MACROS can be controlled using the following:
- The RED/SPEED FADER (13) will create your own color to remain
staic.
- The GREEN/FADE TIME FADER (12) will control the fade speed.
- The BLUE/MASTER DIMMER FADER (11) will control the RGB LEDs
intensity.
- The WHITE/WHITE DIMMER FADER (10) will control the white LEDs
intensity.
5. MANUAL RGBW - Pressing this button activates manual RGBW.
When this mode is active you can press any of the color buttons
located in the COLORS/CHASE grid (14). You can also use the RED/
SPEED FADER (13) to control the red LEDs intensity, the GREEN/FADE
TIME FADER (12) to control the green LEDs intensity, etc.
6. AUTO PROGRAM - Pressing this button will activate the auto pro-
gram. The Auto Program can be controlled using the following:
- The RED/SPEED FADER (13) will control the program speed.
- The GREEN/FADE TIME FADER (12) will control the fade speed.
- The BLUE/MASTER DIMMER FADER (11) will control the RGB LEDs
intensity.
- The WHITE/WHITE DIMMER FADER (10) will control the white LEDs
intensity.
7. STROBE - Activates and deactivates strobing. Use the RED/SPEED (13)
fader to adjust the strobe speed.
8. RGB FADE - Pressing this button activates RGB FADE.
1
2
8
7
6
5
4
3
10
9
14
13
12
11
