©
American DJ Supply
®
- www.americandj.com - Mystic LED™ User Manual Page 10
©
American DJ Supply
®
- www.americandj.com - Mystic LED™ User Manual Page 9
connector is the output. For longer cable runs we suggest a
terminator at the last fixture.
Note: You can also daisy chain the
power cords, this can only be done with 20 fixtures. After 20
you will need to use a new power outlet. They must be the
same fixtures. DO NOT mix fixtures.
You do not have to assign the units Master/Slave.
They will auto-
matically fall into Master/Slave mode.
2. Use the sensitivity knob on the rear of the master unit to make it
more or less sensative to sound.
.
3. The optional
UC3 Controller
(not included)
may be used to
control different functions including blackout.
DMX Mode:
Operating through a DMX controller give the user the freedom to cre-
ate their own programs tailored to their own individual needs.
1. This function will allow you to control each individual fixture’s
traits with a standard Elation
®
DMX 512 controller
.
2. The Mystic LED™ uses four DMX channels to operate see page 8
for the DMX traits.
3. To control your fixture in DMX mode, follow the set-up procedures
on pages 5-6 as well as the set-up specifications that are
included with your DMX controller.
4. Follow the instructions on page 7 to set the DMX address.
5. Use the controller’s faders to control the various DMX fixture traits.
Mystic LED™ Operating Instructions
Locate and remove the unit’s power cord. Once the cord has been
removed located the fuse holder located inside the power socket.
Insert a flat-head screw driver into the power socket and gently pry out
the fuse holder. Remove the bad fuse and replace with a new one. The
fuse holder has a built-in socket for a spare fuse be sure not to confuse
the spare fuse with active fuse.
Mystic LED™ Fuse Replacement
Mystic LED™ DMX Traits
Channel Value
Function
1 LED OFF/ON & STROBE
0 - 1 LED OFF
2 - 127 STROBE SLOW - FAST
128 - 135 LED ON
136 - 253 RANDOM STROBE SLOW - FAST
254 - 255 LED ON
2 LED COLORS & RAINBOW EFFECT
SPEED CONTROL
0 - 41 RED
42 - 83 RED & GREEN
84 - 125 GREEN
126 - 167 GREEN & BLUE
168 - 209 BLUE
210 - 251 BLUE & RED
252 - 255 ALL ON
0 - 255 RAINBOW EFFECT SLOW - FAST
3 RAINBOW EFFECT
0 - 63 RAINBOW EFFECT OFF
64 - 127 RAINBOW EFFECT ON
128 - 255 RAINBOW EFFECT OFF
4 LED ROTATION
0 NO ROTATION
1 - 85 CLOCKWISE ROTATION FAST - SLOW
86 - 170 COUNTER CLOCKWISE ROTATION
SLOW - FAST
171 - 178 NO ROTATION
179 - 255 RANDOM ROTATION SLOW - FAST
Note: When the Rainbow effect is active (Channel 3, values
64 -127), Channel 2 will control the speed of the Rainbow
Effect (values 0-255).