Mini Emerald Beam™
Warning Labels
©
American DJ
®
- www.americandj.com - Mini Emerald Beam™ Instruction Manual Page 6
©
American DJ
®
- www.americandj.com - Mini Emerald Beam™ Instruction Manual Page 5
Mini Emerald Beam™
Control & Functions
1. XLR Output Jack -
This female output jack is used to transmit the
incoming DMX signal to another DMX fixture, or transmit a Master/
Slave signal to the next Mini Emerald Beam™ in the chain. For best
results in DMX or Master/Slave mode terminate this jack if it is the last
unit in the chain. See “Terminator” on page 9.
2. Power Switch -
This switch will control the unit’s main power.
3. AC Voltage Input -
This connector is used to supply main power to
the unit via the included detachable power supply. Only use the sup-
plied power adaptor to avoid damaging the unit.
4. Audio Sensitivity Knob -
This adjusts the audio sensitivity of the
internal microphone. Turning the sensitivity knob in the clockwise
direction will increase the sensitivity to sound. Turning the knob in
the counter clockwise direction will decrease the fixture’s sensitivity
to sound. If the knob is turned completely in the counter-clockwise
direction the sound sensitivity function will turn off.
5. Dip Switches -
These switches serve two functions. In master-
slave mode these switches are used to assign a specific head address.
In DMX mode these switches are used to assign a DMX address to
the unit. In DMX mode each switch corresponds to a specific value
based on binary code. See pages 7-9 for a detailed explanation of
DMX binary code.
6. XLR Input Jack -
This male input jack is used to accept an incom-
ing DMX signal or Master/Slave signal.
CAUTION IMPORTANT! When installing this projector, make sure
that it is mounted in a manner that prevents the audience from
looking directly into the beam, and the beam from striking the
audience.
6
4
3
2
1
5
