background image

User Instructions

©

American DJ

®

 - www.americandj.com - Micro Star Instruction Manual Page 2

Unpacking: 

Thank you for purchasing the Micro Star by American DJ

®

Every Micro Star has been thoroughly tested and has been shipped in 
perfect  operating  condition.  Carefully  check  the  shipping  carton  for 
damage that may have occurred during shipping. If the carton appears 
to be damaged, carefully inspect your fixture for any damage and be 
sure all equipment necessary to operate the unit has arrived intact. In 
the event damage has been found or parts are missing, please contact 
our toll free customer support number for further instructions. Please 
do not return this unit to your dealer without contacting customer sup-
port first. 

Introduction: 

The Micro Star is an simple, small, bright, green and 

red laser fixture. The Micro Star produces more than 200 beams with 
star patterns that may be projected on a wall, ceiling, or dance floor. 
The Micro Star is a stand alone fixture with 2 operating modes; sound 
active and auto. The Micro Star’s compact, light weight case design 
make it ideal for mobile entertainers, bands, night clubs and bar. For 
best results use fog or special effects smoke to enhance the beams 
projections.  

Customer Support:

 

American DJ

®

 provides a toll free customer sup-

port line, to provide set up help and  to answer any question should 
you  encounter  problems  during  your  set  up  or  initial  operation.  You 
may  also  visit  us  on  the  web  at  www.americandj.com  for  any  com-
ments or suggestions. For service related issue please contact Ameri-
can DJ

®

. Service Hours are Monday through Friday 8:00 a.m. to 4:30 

p.m. Pacific Standard Time.
 

Voice:   

(800) 322-6337

 

Fax: 

  

(323) 582-2941

 

E-mail:  

[email protected]

To purchase parts online visit http://parts.americandj.com

Warning!

 

To prevent or reduce the risk of electrical shock or fire, do 

not expose this unit to rain or moisture. 

Caution! 

There are no user serviceable parts inside this unit. Do not 

attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact 
American DJ customer support.
PLEASE recycle the shipping carton whenever possible.

  Micro Star   

 

                     General Introduction

    Rev. 6/11

Summary of Contents for Micro Star







Reviews: