![background image](http://html1.mh-extra.com/html/american-dj/mega-pixel-led/mega-pixel-led_user-instructions_2922785006.webp)
DMX MENU:
NOTE: Whenever a DMX signal is received, i.e., a XLR cable is
connected, the fixture will automatically go to the DMX Address
Setting.
Operating through a DMX controller give the user the freedom to cre-
ate their own programs tailored to their own individual needs. This
function also allows you to use your fixtures as spot lights.
1. This function will allow you to control each individual fixture’s
traits with a standard DMX 512 controller such as the
Elation
®
Show Designer™ or the Elation
®
DMX Operator.™
2. To run your fixture in DMX mode, plug in the fixture via the XLR
connections to any standard DMX controller. Set your desired
DMX address following the directions on page 8, and the set-up
specifications that come with your DMX controller.
NOTE:
Regarding 7, 10, 16, and 28 DMX Channel Modes:
The
macro/program channel will overide all RGB channels. When the
macro/program channel is being used the macro speed channel will
control the speed. You can also set the macro/program to sound
active by setting the values of the macro speed channel between
243-255. To use the color fade, the macro/program channel must be
completely off. Please see the diagram on page 13 very help.
24 DMX Channel Mode does not a have macro/program, strobe,
or a master dimmer channel.
Mega Pixel LED Operating Instructions
©
American DJ Supply
®
- www.americandj.com - Mega Pixel LED Instruction Manual Page 12
©
American DJ Supply
®
- www.americandj.com - Mega Pixel LED Instruction Manual Page 11
Mega Pixel LED DMX Channels & Functions
Mega Pixel LED System Menu
d
ISP
- This will “flip” the LED display
1. Tap the MENU button until “d
ISP
” is displayed, press ENTER.
2. Either “
OFF
” (no LED inversion) or “
ON
” (LED inversion) will now
be displayed. Press the UP or DOWN buttons to select one or
the other.
3. Press ENTER, and then press and hold the MENU button
for at
least three seconds
to confirm.
Mega Pixel LED UC3 Control
Blackout To blackout all the fixture
Function Strobe
1.Synchronous
strobe in white
2. Synchronous
strobe in rainbow
3. Synchronous
sound in white
4. Synchronous
sound in rainbow
Select 9 Colors
1. White
2. Red
3. Green
4. Orange
5. Purple
6. Yellow
7. Cyan
8. Magenta
9. Blue
Select 9 Show modes
1. Show 1
2. Show 2
3. Show 3
4. Show 4
5. Show 5
6. Show 6
7. Show 7
8. Show 8
9. Auto fade
Setting speed
1. Slow speed
2. Middle speed
3. Fast speed
Mode
Sound
(LED OFF)
Latch
(LED on)
Chase
(LED blink)
Speed
(LED Fast blink)