©
American DJ
®
- www.Americandj.com - Mega Par Profile System User Manual Page 10
©
American DJ
®
- www.Americandj.com - Mega Par Profile System User Manual Page 9
Mega Par Profile System Operating Instructions
their own programs tailored to their own individual needs. This function
also allows you to use your fixtures as spot lights. The Mega Par Profile
System has 3 DMX modes: 6 Channel mode, 12 Channel mode, and a 15
Channel mode. See pages 12-15 for each modes’ DMX traits.
1. This function will allow you to control each individual fixture’s traits
with a standard DMX 512 controller.
2. To run your fixture in DMX mode press the MODE button until
“d-P.X” is displayed. “X” represents the current displayed DMX chan-
nel mode. Use the UP or DOWN buttons to select your desired
DMX channel mode. See below for the DMX Channel Modes.
3. Once you have chosen your desired DMX Channel mode press the
SETUP button to set your DMX address. Use the UP or DOWN but-
tons to adjust the DMX address.
DMX Channel modes:
• To run the 6 Channel Mode, press the MODE button until “d-P.X”
is displayed. Press the UP or DOWN buttons until “d-P.1” is dis-
played. This is the 6 Channel DMX Mode.
• To run the 12 Channel Mode, press the MODE button until “d-P.X”
is displayed. Press the UP or DOWN buttons until “d-P.2” is dis-
played. This is the 12 Channel DMX Mode.
• To run the 15 Channel Mode, press the MODE button until “d-P.X”
is displayed. Press the UP or DOWN buttons until “d-P.3” is dis-
played. This is the 15 Channel DMX Mode.
4. Please see pages 12-15 for DMX values and traits.
5. After you have chosen your desired DMX Channel mode and
address
plug in the fixture via the XLR connections to any standard
DMX controller.
RFC (Remote Control) On/Off:
This function is used to activate and deactivate the RFC (Remote
Control). When this function is activated you can control the fixture
using the RFC. Please see page 11 for RFC controls and functions.
1. Plug the fixture in and press the MODE button until “AUTO” is dis-
played.
2. Press the SET UP button until “rF.XX” is displayed. “XX” represents
either “on” or “oF”.
3. Press the UP or DOWN buttons to either activate the remote func-
tion (On) or deactivate it (Off).
Master-Slave Configuration:
This function will allows you to link units together to run in a Master-Slave
mode. In Master-Slave operation one unit will act as the controlling unit
and the others will react to the controlling units built-in programs. Any
unit can act as a Master or as a Slave however, only one unit can be pro-
grammed to act as the “Master.”
Master-Slave Connections and Settings:
1. Daisy chain your units via the XLR connector on the rear of the unit.
Use standard XLR data cables to link your units together. Remember
that the Male XLR connector is the input and the Female XLR con-
nector is the ouput. The first unit in the chain (master) will use the
female XLR connector only. The last unit in the chain will use the
male XLR connector only.
2. Connect the first “Slave” unit to the “Master.”
3. Set the “Master” unit to your desired mode of operation. The “Slave”
unit will now follow the “Master”.
Mega Par Profile System Master-Slave Configuration
Mega Par Profile System Foot Controller
The Foot Controller has 4 different functions. To control your fix-
ture you must connect the foot controller using the provided cable.
Connect one end of the cable to the foot controller and the other end
to the rear of the Mega Par Profile System bar. To activate the Foot
Controller press any pedal once. To deactivate the Foot Controller
press the Blackout and Program pedals at the same time.
BLACKOUT
-
Pressing this button will blackout the fixture.
SOUND -
This pedal activates sound active mode.
PROGRAM -
This pedal will activate program mode and cycle
through the 25 programs.
COLOR -
This pedal activates color macro mode.
