American DJ Mega Par Profile Sys User Instructions Download Page 1

User Instructions

  Mega Par Profile System                                 Introduction

©

American DJ

®

  -  www.Americandj.com  - Mega Par Profile System User Manual Page 2

 Rev. 1/13

Unpacking:

 

Thank you for purchasing the Mega Par Profile System 

by American DJ

®

. Every Mega Par Profile System has been thoroughly 

tested and has been shipped in perfect operating condition. Carefully 

check the shipping carton for damage that may have occurred during 

shipping. If the carton appears to be damaged, carefully inspect your 

fixture for any damage and be sure all accessories necessary to oper-

ate the unit has arrived intact. In the case damage has been found 

or  parts  are  missing,  please  contact  our  toll  free  customer  support 

number for further instructions. Do not return this unit to your dealer 

without first contacting customer support. 
Introduction:

 

The American DJ

® 

Mega Par Profile System is part of a 

continuing pursuit to create high quality intelligent lighting. The Mega 

Par  Profile  System  is  an  exciting  all-in-one  DMX  intelligent  LED  par 

system. This lighting system features four RGB color mixing LED fix-

tures. This fixture can be used in a stand alone mode or connected in 

a Master/Slave configuration. This system has six operating modes: 

Sound Active mode, Auto mode, Built-In Program mode, Static Color 

Mode, RGB dimmer mode, and DMX control mode. 

 

Customer Support: American DJ provides a customer support line, to 

provide set up help and to answer any question should you encounter 

problems during your set up or initial operation. You may also visit us 

on the web at www.American DJ.com for any comments or sugges-

tions. Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m. 

Pacific Standard Time.

 

Voice:   

(323) 582-3322

 

Fax:    

(323) 582-3108

 

E-mail:  

[email protected]

Warning!

 

To prevent or reduce the risk of electrical shock or fire, do 

not expose this unit to rain or moisture. 

Caution!

 

There are no user serviceable parts inside this unit. Do not 

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact 

American DJ.

PLEASE recycle the shipping carton when ever possible.

Summary of Contents for Mega Par Profile Sys











Reviews: