background image

  Mega Bar UV100™                                 Safety Precautions

©

American DJ®  -  www.americandj.com  - Mega Bar UV100™ Instruction Manual Page 4

©

American DJ®  -  www.americandj.com  - Mega Bar UV100™ Instruction Manual Page 3

•   To reduce the risk of electrical shock or fire, do not expose this unit  

   rain or moisture
•   Do not spill water or other liquids  into or on to your unit.
•   Be sure that the local power outlet match that of the required volt- 
   age for your unit.
•   Do not attempt to operate this unit if the power cord has been   
   frayed or broken. Do not attempt to remove or break off the ground 
   prong from the electrical cord. This prong is used to reduce the risk  

   of electrical shock and fire in case of an internal short.

•   Disconnect from main power before making any type of connection.
•   Do not remove the cover under any conditions. There are no user  
   serviceable parts inside.
•   Never operate this unit when it’s cover is removed.
•   Never plug this unit in to a dimmer pack
•   Always be sure to mount this unit in an area that will allow proper  
   ventilation. Allow about 6” (15cm) between this device and a wall.
•   Do not attempt to operate this unit, if it becomes damaged.
•   This unit is intended for indoor use only, use of this product out`  
   doors voids all warranties.
•   During long periods of non-use, disconnect the unit’s main power.
•   Always mount this unit in safe and stable matter.
•   Power-supply cords should be routed so that they are not likely to  
   be walked on or pinched by items placed upon or against them,  

   paying particular attention to the point they exit from the unit. 
• Cleaning -The fixture should be cleaned only as recommended by  

  t he manufacturer. See page 3 for cleaning details.
•   Heat -The appliance should be situated away from heat sources  
   such as radiators, heat registers, stoves, or other appliances (inclu-
   d ing amplifiers) that produce heat.

•   The fixture should  be serviced by qualified service personnel when:

    A. The power-supply cord or the plug has been damaged.
    B. Objects have fallen, or liquid has been spilled into the appliance.

    C. The appliance has been exposed to rain or water.
    D. The appliance does not appear to operate normally or exhibits a  

       marked change in performance.

  Mega Bar UV100™ 

  

          Warranty Registration

The Mega Bar UV100™ carries a 3 year (1095 days) limited warranty. 
Please  fill  out  the  enclosed  warranty  card  to  validate  your  purchase 
and  warranty.  You  may  also  register  your  product  online  at  www. 
americandj.com. All returned service items whether under warranty or 
not,  must  be  freight  pre-paid  and  accompany  a  return  authorization 
(R.A.) number. If the unit is under warranty you must provide a copy 
of your proof of purchase invoice. Please contact American DJ® cus-
tomer support for a R.A. number.

  Mega Bar UV100™  

 

 

                     Features

To  optimize  the  performance  of  this  product,  please  read  these 
operating  instructions  carefully  to  familiarize  yourself  with  the  basic 
operations  of  this  unit.  These  instructions  contain  important  safety 
information  regarding  the  use  and  maintenance  of  this  unit.  Please 
keep this manual with the unit, for future reference.

  Mega Bar UV100™  

                      General Instructions

•  UV Wash
•   Strobe Effect
•  Electronic Dimming 0-100%
•   Built in Microphone
•   DMX-512 protocol
•   2 DMX Channels

  Mega Bar UV100™                                                 Cleaning

Due to fog residue, smoke, and dust cleaning the internal and exter

-

nal optical lenses must be carried out periodically to optimize light 
output.  
1.   Use normal glass cleaner and a soft cloth to wipe down the 
 

outside casing.

2.   Clean the external optics with glass cleaner and a soft cloth 

 

every 20 days.

3.  Always be sure to dry all parts completely before plugging 
 

the unit back in.

Cleaning frequency depends on the environment in which the fixture 

operates (i.e. smoke, fog residue, dust, dew). 

Reviews: