ADJ Products, LLC - www.adj.com - Mega Bar RGBA User Manual Page 11
ADJ Products, LLC - www.adj.com - Mega Bar RGBA User Manual Page 12
Master-Slave Configuration:
This function will allows you to link units together to run in a Master-Slave
mode. In Master-Slave operation one unit will act as the controlling unit
and the others will react to the controlling units built-in programs. Any
unit can act as a Master or as a Slave however, only one unit can be pro-
grammed to act as the “Master.”
Master-Slave Connections and Settings:
1. Daisy chain your units via the XLR connector on the rear of the unit.
Use standard XLR data cables to link your units together. Remember
that the Male XLR connector is the input and the Female XLR con-
nector is the ouput. The first unit in the chain (master) will use the
female XLR connector only. The last unit in the chain will use the
male XLR connector only.
2.
Set the “Master” unit to your desired operating mode and then
connect the “Slave” unit or units.
3. For the “Slave” unit(s) press the MODE button until “SLAu” is dis-
played. The “Slave” unit(s) will now follow the “Master” unit.
Mega Bar RGBA Master-Slave Configuration
Mega Bar RGBA ADJ RFC Operation
The ADJ
RFC
remote
(sold seperately) has many different functions and al-
lows you to control your Mega Bar RGBA from long distance. The ADJ
RFC
remote can control your system up to 150 ft. To use the RFC you must first
activate the fixtures receiver, to activate the receiver please see the instruc-
tions on pages 10-11.
BLACKOUT
-
Pressing this button will blackout the fixture.
AUTO RUN
-
This button will run an automatic program. You can control the
fade speed of the Auto Run by pressing the Flash button twice and then ad-
just the speed using the “+” and “-” buttons. Press the Flash button once to
enter Flash mode and use the “+” and “-” buttons to adjust the Flash speed.
PROGRAM SELECTION
-
This button will activate 1 of 2 modes; Color
Select mode or Built-In Programs.
1. Press this button so that the Red LED’s flash, you are now in Color Static
mode. Use the “+” or “-” to scroll through the 15 colors. Once you have
found your color, you can press the Flash Button to activate strobing and
use the “+” or “-” to adjust the Flash rate.
2. Press this button so that the Green LED’s flash, you are now in Built-In
Program mode. Use the “+” or “-” to scroll through the 22 built-in programs.
Once you have found your desired program and you can press the SPEED
button and then use the “+” and “-” buttons to adjust the program speed.
You can press the Flash Button to activate strobing and use the “+” or “-” to
adjust the Flash rate. Press the Flash button twice to enter the Fade speed
adjustment and use the “+” and “-” buttons to adjust the Fade speed.
FLASH
-
This button will activate the flash (strobe) effect. You can control
the flash speed by pressing the “+” and “-” buttons.
SPEED
-
Press this button and use the “+” & “-” buttons to adjust the speed
of the Built in Programs.
SOUND ACTIVE -
This button activates sound active mode. Use the “+” &
“-” buttons to adjust the sound sensitivity level.
R G B W/A -
Press either one of these buttons and the press the “+” or “-”
to adjust the brightness.
“+” and “-” -
Use these buttons to adjust the flash rate, speed of the Auto
Run and built in programs, sound sensitivity, and output intensity. Use these
buttons to scroll through the static colors and built in programs.
