background image

12/09

User Instructions

American DJ

®

  -  www.americandj.com  - Jellyfish Instruction Manual Page 2

Unpacking: 

Thank you for purchasing the Jellyfish by American DJ

®

Every Jellyfish has been thoroughly tested and has been shipped in 
perfect  operating  condition.  Carefully  check  the  shipping  carton  for 
damage that may have occurred during shipping. If the carton appears 
to be damaged, carefully inspect your fixture for any damage and be 
sure all equipment necessary to operate the unit has arrived intact. In 
the event damage has been found or parts are missing, please contact 
our toll free customer support number for further instructions. Please 
do not return this unit to your dealer without contacting customer sup-
port first. 

Introduction: 

The Jellyfish is a DMX intelligent, LED fixture. The fix-

ture  has  three  different  operating  modes;  sound-active  mode,  show 
mode, or it can be controlled by a DMX controller. In DMX mode it has 
2 different channel mode; a 3 channel mode, and 28 channel mode. It 
can operate as a stand alone fixture or in a Master/Slave configuration. 

For best results use fog or special effects smoke to enhance the beams 
projections. 

Customer  Support:

  American  DJ

®

  provides  a  toll  free  customer 

support line, to provide help and to answer any question should you 
encounter problems during your set up or initial operation. You may 
also visit us on the web at www.americandj.com for any comments or 
suggestions. Service Hours are Monday through Friday 9:00 a.m. to 
5:00 p.m. Pacific Standard Time.
 

Voice:   

(800) 322-6337

 

Fax: 

  

(323) 582-2941

 

E-mail:  

[email protected]

To purchase parts online visit http://parts.americandj.com

Warning! 

To prevent or reduce the risk of electrical shock or fire, do 

not expose this unit to rain or moisture. 

Warning! 

This may cause severe eye damage. Avoid looking directly 

into the light source at all times!

  Jellyfish         

                                         General Information

Summary of Contents for Jelly Fish











Reviews: