H2O DMX PRO
System Menu
2. Either “
ON
” or “
OFF
”
will now be displayed. Press the UP or
DOWN buttons to select “
ON
” to keep the LED display on at all
times, or “
OFF
” to allow the LED display to turn off after 2 min-
utes. Press any button to turn on the LED display again.
3. Press ENTER, and then press and hold the MENU button
for at
least three seconds
to confirm.
dISP
- This will “flip” the LED display
1. Press the MENU button until “
dISP
” is displayed, press
ENTER.
2. Either “d
ISP
” or “d
SIP
” will now be displayed. Press the UP or
DOWN buttons to select one or the other.
3. Press ENTER, and then press and hold the MENU button for at
least three seconds to confirm.
MANU
- This function will let you manually test the color
wheel, water wave, and dimmer. In this function you can
also manually adjust and set the color wheel, rotation
speed, and dimmer.
1. Press the MENU button until “
MANU
” is displayed, press
ENTER.
2. Use the UP or DOWN buttons to scroll between “COLO”
(Color), “WAVE” (Water Wave), or “DIMM” (Dimmer). Select the
function you would like to test and press ENTER.
3. Use the UP or DOWN buttons to adjust the values to test/
check the function. Press the MENU button after testing the
functions.
If you would set your desired color, rotation speed, and dimmer,
press the ENTER button after each submenu is adjusted.
Example:
“COLO” is displayed, press ENTER. Make your
adjustments using the UP or DOWN buttons until your desired
color projected. After you have found your desired color, press
ENTER. Scroll to the next function, adjust, and press ENTER.
4. After you have made your desired settings press and hold the
MENU button for at least 3 seconds.
TEST
- This function will run a self test program.
1. Press the MENU button until “
TEST
” is displayed, press
ENTER.
2. The fixture will now run a self test. Press the MENU button to
exit.
FHrS
- With this function you can display the running time
of the unit.
1. Press the MENU button until “
FHrS
” is displayed, press
ENTER.
2. The running time of the fixture will now be displayed. Press
the MENU button to exit.
VEr
- This will display the software version
1. Press the MENU button until “
VEr
” is displayed. Press the
ENTER button and the software vesion will be displayed.
2. Press the MENU button to exit.
rSET
- This will display the software version
1. Press the MENU button until “
rSET
” is displayed. Press the
ENTER button and the unit will reset itself.
©
American DJ Supply
®
- www.americandj.com - H2O DMX PRO Instruction Manual Page 9
©
American DJ Supply
®
- www.americandj.com - H2O DMX PRO Instruction Manual Page 10
H2O DMX PRO
System Menu
