©
American DJ
®
- www.americandj.com - Galaxian Sky™ Instruction Manual Page 14
©
American DJ
®
- www.americandj.com - Galaxian Sky™ Instruction Manual Page 13
1. Tap the MENU button until “
SOUN
” is displayed, press
ENTER.
2. The display will show either “
ON”
or
“OFF
”. Press the UP or
DOWN buttons to select “
ON
” to activate sound active mode, or
“
OFF
” to deactivate sound active mode.
3. Press ENTER to confirm.
BLND -
Blackout or Stand by mode.
1. Tap the MENU button until “
BLND
” is displayed, press
ENTER. Either Yes or No will be displayed.
2. To activate Blackout tap the UP or DOWN buttons until “Yes”
is displayed, press ENTER to confim. The fixture will now be in
Blackout mode. To deactivate Blackout mode, select “No” and
press Enter.
LED -
With this function you can have the LED display
turn off after 10 seconds.
1. Tap the MENU button until “
LED
” is displayed, press ENTER.
2. The display will show either “
ON”
or
“OFF
”. Press the UP or
DOWN buttons to select “
ON
” to keep the LED display on at
all times, or “
OFF
” to switch to have the LED display switch off
after 10 seconds.
3. Press ENTER to confirm.
DISP
- This function will reverse the display 180º.
1. Tap the MENU button until “
DISP
” is displayed, press ENTER.
2. Press ENTER to “flip” the display. Press ENTER to “flip” it
again. Press ENTER when you have made your desired setup.
TEST
- This function is a manual test program. The test
program will test pan and tilt movement.
1. Tap the MENU button until “
TEST
” is displayed, press ENTER.
2. The display will show either “
PAN”
(pan test),
“TILT
” (tilt test),
or “
P T”
(pan & tilt test). Press the UP or DOWN buttons to find
your desired test.
3. Once you have found your desired test press ENTER. The
fixture will now run your desired tes
FHRS
- With this function you can display the running time
of the fixture.
1. Tap the MENU button until “
FHRS
” is displayed, press
ENTER.
2. The display shows the running time of the unit. Press MENU
to exit.
VER
- With this function you can display the version soft-
ware of the unit.
1. Tap the MENU button until “
VER
” is displayed, press ENTER.
2. The display will now display the version of software. Press
MENU to exit.
RSET
- Use this function to reset the unit.
1. Tap the MENU button until “
RSET
” is displayed, press ENTER.
2. The display will now show “
ADJC
” and the fixture will reset all
channels to their standard positions.
3. If you do not wish to reset press the MENU button to return
to the main menu.
Galaxian Sky™
System Menu
Galaxian Sky™
System Menu
