background image

•  Be sure to save the packing carton in the unlikely event the unit 
  may have to be returned for service
•  Do not spill water or other liquids into or on to your fogger. Be

  sure that all the fog fluid is kept inside the fluid reservoir

•  Be sure that the local power outlet match that or the required 
  voltage for your fog machine
•   Do not remove the top cover under any conditions. There are no
  user serviceable parts inside
•   Disconnect the unit’s main power when left unused for long peri- 
  ods of time
•  Never connect this unit to a dimmer pack
•   Do not attempt to operate this unit, if it becomes damaged in anyway
•  Never operate this unit when it’s cover is removed

•  To reduce the risk of electrical shock or fire, do not expose this 

  unit rain or moisture
•  Do not attempt to operate this unit if the power cord has been fray-
  ed or broken. Do not attempt to remove or break off the ground
  prong from the electrical cord. This prong is used to reduce the  

  risk of electrical shock and fire in case of an internal short

•  Disconnect from main power before making any type of connection
•  Never block the ventilation holes. Always be sure to mount this 
  unit in an area that will allow proper ventilation. Allow about 6” 
  (15cm) between this device and a wall
•  This unit is intended for indoor use only, use of this product out- 
  doors voids all warranties
•  Always mount this unit in a safe and stable matter

•  Please route your power cord out of the way of foot traffic. Power 

  cords should be routed so they are not likely to be walked on, 
  pinched by items placed upon or against them
•  The unit should only be serviced by qualified service personnel 
  when:
   

A. The power-supply cord or the plug has been damaged.

   

B. Objects have fallen, or liquid has been spilled into the unit.

   

C. The unit has been exposed to rain or water.

   

D. The appliance does not appear to operate normally or 

   

     exhibits a marked change in performance.

  fog Storm 1700HD™     

              Safety Precautions

  fog Storm 1700HD™     

 

                Description

©

American DJ Supply

®

   - Fog Storm 1700HD™  Instruction Manual Page 3

The  new  Fog  Storm  1700HD™  fog  machines  features  a  fog  juice 
level sensor. When the fog juice level is low, a green L.E.D. will glow. 
When the fog juice level reaches a lower level, a bult-in sensor inside 
the  reservoir  will  automatically  shut  off  the  pump.  This  will  greatly  
expand the life of the pump. The Fog Storm 1700HD™ includes the 
revolutionary new heating element that has been specially designed 
to  prevent  excessive  particle  build  up  that  can  cause  premature 
fogger  failure.  A  larger  copper  tube  is  spiraled  inside  the  heater  to 
prevent  clogging.  The  Fog  Storm  1700HD™  includes  a  wide-angle 
spray nozzle and long-life pump that was specially designed for high 
performance fogger output. The Fog Storm 1700HD™ also includes 
a 25 foot (eight meters) DMX timer remote, that may be removed for 
periods of non-use. An optional wireless remote control is also avail-
able from American DJ

®.

 This wireless remote increases the function-

ality of the fogger greatly.

©

American DJ Supply

®

   - Fog Storm 1700HD™  Instruction Manual Page 4

  fog Storm 1700HD™     

 

 

             Set-up

1. Open the shipping carton and carefully remove the unit from the  
  shipping carton.
2. Be sure to remove all the packing material especially around the  
  nozzle.
3. Set the fog machine on a flat dry surface. Locate the included    
  bracket from the package and install it using the supplied hard- 
  ware to the side casing. Note: The bracket is an optional accesso- 
  ry and may not be used if desired, however if you intend to sus- 
  pend the unit from truss the bracket must be used.
4. Remove the fluid reservoir and fill it with American DJ

®

 

branded  

  fog juice only and replace the reservoir.
5. Place the feeder tube with the filter deep inside the reservoir and  
  tighten the cap.
6. Firmly attach the remote control unit to the rear remote control 
  socket on the unit.
7. Plug the unit in to a matching power supply. Wait approximately  
  five minitues for the fogger to reach normal operating temperature.
8. Follow the operating instructions on the next page for proper    
  operation.

Reviews: