background image

•  Be sure to save the packing carton in the unlikely event the unit 

  may have to be returned for service

•  Do not spill water or other liquids into or on to your fogger. Be

  sure that all the fog fluid is kept inside the fluid reservoir

•  Be sure that the local power outlet match that or the required 

  voltage for your fog machine

•   Do not remove the top cover under any conditions. There are no

  user serviceable parts inside

•   Disconnect the unit’s main power when left unused for long peri- 

  ods of time

•  Never connect this unit to a dimmer pack

•   Do not attempt to operate this unit, if it becomes damaged in anyway

•  Never operate this unit when it’s cover is removed

•  To reduce the risk of electrical shock or fire, do not expose this 

  unit rain or moisture

•  Do not attempt to operate this unit if the power cord has been fray-

  ed or broken. Do not attempt to remove or break off the ground

  prong from the electrical cord. This prong is used to reduce the  

  risk of electrical shock and fire in case of an internal short

•  Disconnect from main power before making any type of connection

•  Never block the ventilation holes. Always be sure to mount this 

  unit in an area that will allow proper ventilation. Allow about 6” 

  (15cm) between this device and a wall

•  This unit is intended for indoor use only, use of this product out- 

  doors voids all warranties

•  Always mount this unit in a safe and stable matter

•  Please route your power cord out of the way of foot traffic. Power 

  cords should be routed so they are not likely to be walked on, 

  pinched by items placed upon or against them

•  The unit should only be serviced by qualified service personnel 

  when:

   

A. The power-supply cord or the plug has been damaged.

   

B. Objects have fallen, or liquid has been spilled into the unit.

   

C. The unit has been exposed to rain or water.

   

D. The appliance does not appear to operate normally or 

   

     exhibits a marked change in performance.

  Fog Fury 3000    

                       Safety Precautions

ADJ Products, LLC  -  www.adj.com  - Fog Fury 3000 Instruction Manual Page 3

Introduction:

 

Congratulations, you have just purchased one of the 

most reliable fog machines on the market today! The Fog Fury 3000 

commercial fog machine have been designed to perform reliably for 

years when the guidelines in this booklet are followed. 

Please read and 

understand  the  instructions  in  this  manual  carefully  and  thoroughly 

before  attempting  to  operate  this  unit.  These  instructions  contain 

important information regarding safety during use and maintenance.

Customer Support: 

ADJ Products, LLC provides a toll free customer 

support line, to provide set up help and  to answer any question should 

you  encounter  problems  during  your  set  up  or  initial  operation.  You 

may also visit us on the web at www.adj.com for any comments or 

suggestions. 

For service related issue please contact ADJ Products, 

LLC.

 Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m. 

Pacific Standard Time.

 

Voice:   

(800) 322-6337

 

Fax:    

(323) 582-2941

 

E-mail:  

[email protected]

To purchase parts online visit http://parts.americandj.com

Warning! 

To prevent or reduce the risk of electrical shock or fire, do 

not expose this unit to rain or moisture. 

Caution!

 There are no user serviceable parts inside this unit. Do not 

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact 

ADJ Products, LLC.
Do not discard the shipping cartoon in the trash. Please recycle when 

ever possible.

SAFETY ISSUES:

NEVER POINT OR AIM A FOG MACHINE TOWARDS PEOPLE OR 

THEIR CLOTHING. THIS UNIT EMITS HOT VAPOR AND SHOULD 

BE USED WITH THE SAME CARE THAT YOU WOULD OBSERVE 

WHEN USING AN ELECTRIC KETTLE OR IRON.

  Fog Fury 3000    

 

 

             Introduction

Please Note: Specifications and improvements in the design of 

this unit and this manual are subject to change without any prior 

written notice.

ADJ Products, LLC  -  www.adj.com  - Fog Fury 3000 Instruction Manual Page 2

Summary of Contents for Fog Fury 3000









Reviews: