background image

©

American DJ

®

  -  www.americandj.com  - Festive Light Pak II™ Instruction Manual Page 3

The Festive Light Pak II™ carries a one year (365 days) limited war-

ranty. Please fill out the enclosed warranty card to validate your pur-

chase. All returned service items whether under warranty or not, must 

be freight pre-paid and accompany a return authorization (R.A.) num-

ber. If the unit is under warranty, you must provide a copy of your 

proof of purchase invoice. Please contact American DJ

®

  customer 

support for a R.A. number.

  Festive Light Pak II™                        Product Registration

•  To reduce the risk of electrical shock or fire, do not expose this unit  

   rain or moisture

•  Do not spill water or other liquids  into or on to your unit.

•  Be sure that the local power outlet match that of the required volt- 

   age for your unit.

•  Do not attempt to operate this unit if the power cord has been    

   frayed or broken. 

•  Do not attempt to remove or break off the ground prong from    

   the electrical cord. This prong is used to reduce the risk of electri- 

   cal shock and fire in case of an internal short.

•  Disconnect from main power before making any type of connection.

•   Do not remove the cover under any conditions. There are no user  

   serviceable parts inside.

•  Never operate this unit when it’s cover is removed.

•  Never plug this unit in to a dimmer pack

•  Always be sure to mount this unit in an area that will allow proper  

   ventilation. Allow about 6” (15cm) between this device and a wall.

•  Do not attempt to operate this unit, if it becomes damaged.

•  This unit is intended for indoor use only, use of this product out  

   doors voids all warranties.

•  During long periods of non-use, disconnect the unit’s main power.

•  Always mount this unit in safe and stable matter.

•  Power-supply cords should be routed so that they are not likely to  

   be walked on or pinched by items placed upon or against them,  

   paying particular attention to cords at plugs, convenience recep- 

   tacles, and the point where they exit from the appliance. 

• Cleaning -The fixture should be cleaned only as recommended by  

   the manufacturer. See page 3 for cleaning details.

•  Heat -The appliance should be situated away from heat sources  

   such as radiators, heat registers, stoves, or other appliances   

   (including amplifiers) that produce heat.

•  The fixture should  be serviced by qualified service personnel    

   when:

    A. The power-supply cord or the plug has been damaged.

    B. Objects have fallen, or liquid has been spilled into the appliance.

    C. The appliance has been exposed to rain or water.

    D. The appliance does not appear to operate normally or exhibits a  

    

  

 marked change in performance.

 Festive Light Pak II™    

 

   Safety Precautions

©

American DJ

®

  -  www.americandj.com  - Festive Light Pak II™ Instruction Manual Page 4

  Festive Light Pak II™   

           General Instructions

Please carefully read and understand the instructions in this manual 

thoroughly before attempting to operate this unit. These instructions 

contain important safety information regarding the use and mainte-

nance of this unit. Please keep this manual with the unit, for future 

reference.

  Festive Light Pak II™    

 

 

          Cleaning

Cleaning Fixtures:

 Due to fog residue, smoke, and dust cleaning 

the internal and external optical lenses and mirror should be carried 

out periodically to optimize light output. Cleaning frequency depends 

on  the  environment  in  which  the  fixture  operates  (I.e.  smoke,  fog 

residue, dust, dew). In heavy club use we recommend cleaning on a 

monthly basis. Periodic cleaning will ensure longevity, and crisp out-

put.
1.  Use normal glass cleaner and a soft cloth to wipe down the out- 

  side casing.

2.   Use a brush to wipe down the cooling vents and fan grill.

3.   Clean the external optics with glass cleaner and a soft cloth every  

  20 days.

4.   Clean the internal optics with glass cleaner and a soft cloth every  

  30-60 days.

5.  Always be sure to dry all parts completely before plugging the unit  

  back in.

Reviews: