American DJ Fantasy Scan 250 User Instructions Download Page 3

American DJ

®

  -  www.americandj.com  - Fantasy Scan 250™ Instruction Manual Page 5

  Fantasy Scan 250™  

             Discharge Lamp Warning

This fixture is fitted with a discharge lamp which 
is  highly  susceptible  to  damage  if  improperly 
handled. Never touch the lamp with your bare fin-
gers as the oil from your hands will shorten lamp 
life.  Also,  never  move  the  fixture  until  the  lamps 
have had ample time to cool. Remember, lamps 
are not covered under warranty conditions.

 Fantasy Scan 250™  

 

 

                    Features

The Fantasy Scan 250™ carries a one year limited warranty. Please fill 
out the enclosed warranty card to validate your purchase. All returned 
service items whether under warranty or not, must be freight pre-paid 
and accompany a return authorization (R.A.) number. The R.A. number 
must be clearly written on the outside of the return package. A brief 
description of the problem as well as the R.A. number must also be 
written down on a piece of paper and included in the shipping carton. 
If the unit is under warranty, you must provide a copy of your proof of 
purchase  invoice.  You  may  obtain  a  R.A.  number  by  contacting  our 
customer support team on our toll free customer support number. All 
packages  returned  to  the  service  department  not  displaying  a  R.A. 
number on the outside of the package will be returned to the shipper 
at the shippers cost.

  Fantasy Scan 250™  

 

           Product Registration

American DJ

®

  -  www.americandj.com  - Fantasy Scan 250™ Instruction Manual Page 6

To optimize the performance of this product, please read these operating 
instructions carefully to familiarize yourself with the basic operations of 
this unit. These instructions contain important safety information regard-
ing the use and maintenance of this unit. Please keep this manual with 
the unit, for future reference.

  Fantasy Scan 250™ 

 

           General Instructions

This unit emits intense UV radiation which is harmful to the eyes and 
skin.  The  intense  luminance  of  the  lamp  can  cause  severe  damage 
to the retina. Never operate this unit without it’s covers, these covers 
have been specially designed to shield against UV radiation.

Epileptic Warning: 

Those suffering from epilepsy should avoid looking 

directly into the lamp at all times.

Avoid switching the fixture on and off repeatedly in short intervals as 
this will reduce lamp life and intensity.
To achieve the intensity associated with discharge lamps, these lamps  
use gas sealed in a high pressure environment to emit a brilliant output.  
Due to the high pressure involved with the construction of the lamp, 
the  lamp  may  explode  during  prolonged  extensive  use.  This  risk  is 
increased with age, added care is encouraged when dealing with older 
lamps.  Extreme  caution  should  be  used  when  operating  this  or  any 
fixture fitted with a gas discharge lamp. Never open this unit while in 
use.

Caution!

 There are no user serviceable parts inside this unit. Do not 

attempt  any  repairs  yourself,  doing  so  will  void  your  manufactures 
warranty.  In  the  unlikely  event  your  unit  may  require  service  please 
contact American DJ

®

.

During  operation  the  housing  may  become  extremely  hot.  Avoid 
touching the unit with bare hands while in use.
American DJ

®

 will not accept any liability for any resulting damages 

caused  by  the  non-observance  of  this  manual  or  any  unauthorized 
modification to this unit.

  Fantasy Scan 250™  

                   Handling Precautions

•   Micro-Stepping Motors for Smooth Color and Gobo Transitions
•   DMX-512 Protocol Compatible (Uses Eight DMX Channels)
•  Independent Gobo and Color Wheels
•   5 Rotating Gobos w/ Shake, 4 Dichroic and 1 metal gobo + 
  Spot - All Replaceable
•  Multi-Colored Wheel
•  3 Operating Modes - Master/Slave; Stand Alone; Sound Active
•  Internal Microphone 
•  ZB-MSD250/2 Discharge Lamp,   250w    2000 Hours
•   Edit and Save Scenes into the Memory
•  Manual Focus Lens
•  180˚ Pan Movement 
•  45˚ Tilt Movement 
•   Digital Display for Address and Function Setting
•   Mini/C Input Jack for Blackout Function
     (Mini/C Controller Not Included) 

Summary of Contents for Fantasy Scan 250





















Reviews: