©
American DJ
® -
www.americandj.com - Energy One™ Instruction Manual Page 4
Energy One™
Safety Warnings
Energy One™
Warranty Registration
©
American DJ
® -
www.americandj.com - Energy One™ Instruction Manual Page 3
Safety Issues:
This unit may blow a fuse if the maximum allotted
load of 15 amps (7 amps 220v version) is reached. If the fuse needs
replacement, always replace the fuse with same exact type that was
remove, unless otherwise instructed by an authorized American DJ
®
service technician. Use of a different type fuse from that which is rec-
ommended may cause fire or electric shock and will void the manufac-
tures warranty.
• To reduce the risk of electrical shock or fire, do not expose this unit
rain or moisture.
• Do not spill water or other liquids into or on to your unit.
• Do not attempt to remove or break off the ground prong from the
electrical cord. This prong is used to reduce the risk of electrical
shock and fire in case of an internal short. Do not attempt to oper-
ate this unit if the power cord has been frayed or broken.
• Disconnect from main power before making any type of connection.
• Do not remove the cover under any conditions. There are no user
serviceable parts inside.
• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall.
• Do not attempt to operate this unit, if it becomes damaged.
• This unit is intended for indoor use only, use of this product out-
doors voids all warranties.
• During long periods of non-use, disconnect the unit’s main power.
• Always mount this unit in safe and stable matter.
• Power cords should be routed so they are not likely to be walked
on, pinched by items placed upon or against them.
• Cleaning -The fixture should be cleaned only as recommended by
the manufacturer. See page 4 for cleaning details.
• Heat -The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances
(including amplifiers) that produce heat.
• The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the unit.
C. The unit has been exposed to rain or water.
D. The unit does not appear to operate normally or exhibits a
marked change in performance.
The Energy One™ carries a one year (365 days) limited warranty.
Please fill out the enclosed warranty card to validate your purchase.
All returned service items whether under warranty or not, must be
freight pre-paid and accompany a return authorization (R.A.) number.
The R.A. number must be clearly written on the outside of the return
package. A brief description of the problem as well as the R.A. num-
ber must also be written down on a piece of paper and included in
the shipping container. If the unit is under warranty, you must provide
a copy of your proof of purchase invoice. You may obtain a R.A. num-
ber by contacting customer support at (800) 322-6337.
Energy One™
Cleaning Instructions
Due to fog residue, smoke, and dust cleaning the fixture should be
carried out periodically to optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the out-
side casing every 20 days.
2. Use normal glass cleaner with a soft cloth to wipe down the inside
reflector and lens every 30-60 days.
3. Always be sure to dry all parts completely before plugging the
unit back in.
4. Frequent cleaning the unit will extend lamp life and ensure the fix-
tures reliability.
Cleaning frequency depends on the environment in which the fixture
operates (I.e. smoke, fog residue, dust, dew). In heavy use we rec-
ommend cleaning on a monthly basis. Periodic cleaning will ensure
longevity, and crisp light output.
Energy One™
Features
• Bright 200 Watt Strobe Lamp
• Manual Dimmer Setting
• Adjustable Flash Rate
• Large coverage area
• Link Up To 16 Units Together
• Built-In Adjustable Hanging Yoke
• Optional Remote Control (Not Included)
