Electra LED™
Operation
©
American DJ Supply
®
- www.americandj.com - Electra LED™ Instruction Manual Page 3
©
American DJ Supply
®
- www.americandj.com - Electra LED™ Instruction Manual Page 4
Electra LED™
Warranty Registration
The Electra LED™ carries a three year (1095 days) limited warranty.
Please fill out the enclosed warranty card to validate your purchase.
All returned service items whether under warranty or not, must be
freight pre-paid and accompany a return authorization (R.A.) num-
ber. The R.A. number must be clearly written on the outside of the
return package. A brief description of the problem as well as the R.A.
number must also be written down on a piece of paper and included
in the shipping container. If the unit is under warranty, you must pro-
vide a copy of your proof of purchase invoice. You may obtain a R.A.
number by contacting customer support at (800) 322-6337.
Electra LED™
Features
• Includes Built-In Hanging Yoke
• Sound-Active
• Light Weight
• LED Output Similar to 250W Lamp
• Voltage is User Selectable
To optimize the performance of this product, please read these
operating instructions carefully to familiarize yourself with the basic
operations of this unit. These instructions contain important safety
information regarding the use and maintenance of this unit. Please
keep this manual with the unit, for future reference.
Electra LED™
General Instructions
Electra LED™
Fuse Replacement
Introduction:
The American DJ
®
Electra
LED™
is a dual output LED
moon-flower effect. This fixture is designed for mobile DJ’s, clubs,
bands, roller rinks and any arena that requires a compact, light weight,
easy to use unit.
Power Supply:
Before plugging your unit in, be sure the source volt-
age in your area matches the required voltage for your American DJ
®
Electra LED™ before attempting operation.
General Operation:
This fixture is designed to operate as a stand
alone sound active unit, there is no need of a controller. It has been
tested and there is no assembly necessary. The Electra LED™ is
ready to be plugged in out of the box, there is no power switch.
When this fixture is plugged in, the units LED panel will start to proj-
ect preset designs, all to the sound of an audio source via an internal
microphone. The audio sensitivity is preset at the factory for opti-
mum performance and is not user adjustable. After plugging the unit
if there is no LED output check the breaker. If the breaker has not
popped, please contact customer support for further instructions.
This fixture features a light weight case design and an adjustable
hanging bracket.
Fuse Replacement:
First unplug the power. The fuse holder is
located at the rear of the unit next to the power cord. Using a flat-
head screw driver unscrew the fuse holder. Remove the bad fuse and
replace with a new one.
