![background image](http://html1.mh-extra.com/html/american-dj/eco-uv-bar-50-ir/eco-uv-bar-50-ir_user-instructions_2923063003.webp)
Eco UV Bar 50 IR Safety Precautions
ADJ Products, LLC - www.adj.com - Eco UV Bar 50 IR User Manual Page 4
ADJ Products, LLC - www.adj.com - Eco UV Bar 50 IR User Manual Page 5
• To reduce the risk of electrical shock or fire, do not expose this unit
rain or moisture
• Do not spill water or other liquids into or on to your unit.
• Be sure that the local power outlet match that of the required volt-
age for your unit.
• Do not attempt to operate this unit if the power cord has been
frayed or broken. Do not attempt to remove or break off the ground
prong from the electrical cord. This prong is used to reduce the risk
of electrical shock and fire in case of an internal short.
• Disconnect from main power before making any type of connection.
• Do not remove the cover under any conditions. There are no user
serviceable parts inside.
• Never operate this unit when it’s cover is removed.
• Never plug this unit in to a dimmer pack
• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall.
• Do not attempt to operate this unit, if it becomes damaged.
• This unit is intended for indoor use only, use of this product out`
doors voids all warranties.
• During long periods of non-use, disconnect the unit’s main power.
• Always mount this unit in safe and stable matter.
• Power-supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them,
paying particular attention to the point they exit from the unit.
• Cleaning -The fixture should be cleaned only as recommended by
t he manufacturer. See page 5 for cleaning details.
• Heat -The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances (inclu-
d ing amplifiers) that produce heat.
• The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a
marked change in performance.
Eco UV Bar 50 IR
Operation
General Operation:
The ADJ Eco UV Bar 50 IR
contains an auto-
matic voltage switch, which will auto sense the voltage when it is
plugged into the power source. With this switch you do not need to
worry about wall voltage, this unit can be plugged in anywhere. This
fixture is designed to operate as a stand alone unit. It has been tested
and there is no assembly necessary. The Eco UV Bar 50 IR is ready
to be plugged in out of the box. Plug the unit in to a matching power
outlet or into a power pack and “flip” the power switch to the On posi-
tion. Light output will be immediate when the unit is powered on.
Eco UV Bar 50 IR
Cleaning
Fixture Cleaning:
Due to fog residue, smoke, and dust cleaning the internal and exter-
nal optical lenses should be carried out periodically to optimize light
output. Cleaning frequency depends on the environment in which the
fixture operates (I.e. smoke, fog residue, dust, dew). In heavy club use
we recommend cleaning on a monthly basis. Periodic cleaning will
ensure longevity, and crisp output.
1. Use normal glass cleaner and a soft cloth to wipe down the out-
side casing.
2. Clean the external optics with glass cleaner and a soft cloth every
20 days.
3. Clean the internal optics with glass cleaner and a soft cloth every
30-60 days.
4. Always be sure to dry all parts completely before plugging the unit
back in.
Eco UV Bar 50 IR
IR Remote
IR Remote:
The included IR remote is a basic remote control that can
control strobing and strobing speed. Each press of the Strobing but-
ton will change the speed. The strobing speed goes from full on, to
slowest strobing, then moderate strobing and finally fastest strobe.
Pressing the On/Off button will allow the remote to blackout the Eco
UV Bar 50 IR.