background image

©

American DJ

®

  -  www.americandj.com  - Dynasty Ray User Manual Page 5

©

American DJ

®

  -  www.americandj.com  - Dynasty Ray User Manual Page 6

 Dynasty Ray                                           Lamp Replacement

Caution:

 

Always replace with the exact same type lamp, unless oth-

erwise  specified  by  an  authorized  American  DJ

®

  service  technician. 

Replacing  with  anything  other  than  the  specified  part  can  damage 
your unit and will void your manufactures warranty.

Warning:

 

If you continue to blow the lamp or fuse, STOP using the 

unit. Contact customer support for further instructions, you may have 
to return the unit for servicing. Continuing to use the unit may cause 
serious damage.

Lamp  Replacement:

 

Caution!  Never  attempt  to  change  the  lamp 

while  the  fixture  is  plugged  in.  Always  disconnect  the  main  power 
and  allow  the  unit  ample  time  to  cool  before  attempting  to  replace 
the lamp. 
1.   Be sure to follow the proper handling procedures that deal with  
 

halogen lamps.

2.   Loosen the small screw located on the front of the unit 
3.   After loosening the screw, remove the socket assembly cover to  
 

expose the lamp.

4.  Carefully remove the old lamp and discard it in the trash.
5.  Replace the lamp with an exact match and reassemble in reverse  
 

order.

Halogen  Lamp  Warning:

  This  fixture  is  fitted 

with  halogen  lamps  which  are  highly  susceptible 
to damage if improperly handled. Never touch the 
lamps  with  your  bare  fingers  as  the  oil  from  your 
hands will shorten lamp life. Also, never move the 
fixture until the lamps have had ample time to cool. 
Remember, lamps are not covered under warranty 
conditions.

Fuse Replacement:

 

CAUTION!

 Never attempt to change the fuse 

while the fixture is plugged in. 

ALWAYS

 disconnect the main power 

before attempting to replace the fuse. 
1.   Loosen the small lock screw located on the front of the unit 
2.   After loosening the screw, remove the socket assembly cover.
3.  Unscrew and remove the four phillips screws (A1, A2, A3, and  
 

A4).

4.  The fuse box is located on the PC board on the bottom left side,  
 

pull the fuse box up to replace the fuse.

FUSE

A1

A2

A4

A3

 Dynasty Ray                                            Fuse Replacement

Summary of Contents for Dynasty Ray

Page 1: ...ppears to be damaged carefully inspect your units for any damage and be sure all accessories necessary to operate the system have arrived intact In the event damage has been found or parts are missing please contact our toll free customer support number for fur ther instructions Please do not return the system to your dealer with out first contacting customer support Customer Support American DJ pr...

Page 2: ...nit for servicing After plugging this fixture in the units mirror gobo wheel and color wheel will all react to sound This fixture is designed for mobile DJ s clubs bands roller rinks and any arena that requires a compact light weight easy to use fixture Dynasty Ray Cleaning Due to fog residue smoke and dust cleaning the internal and external optical lenses must be carried out periodically to optim...

Page 3: ... the small screw located on the front of the unit 3 After loosening the screw remove the socket assembly cover to expose the lamp 4 Carefully remove the old lamp and discard it in the trash 5 Replace the lamp with an exact match and reassemble in reverse order Halogen Lamp Warning This fixture is fitted with halogen lamps which are highly susceptible to damage if improperly handled Never touch the l...

Page 4: ...ts the reli ability of the product if the product has been repaired or serviced by anyone other than the American DJ factory unless prior written authorization was issued to purchaser by American DJ if the product is damaged because not properly maintained as set forth in the instruction manual D This is not a service contract and this warranty does not include maintenance cleaning or periodic che...

Reviews: