background image

©

American DJ

®

 - www.americandj.com - Duo Scan RG Instruction Manual Page 4

©

American DJ

®

 - www.americandj.com -  Duo Scan RG Instruction Manual Page 3

Please carefully read and understand the instructions in this manual 
thoroughly before attempting to operate this unit. These instructions 
contain  important  safety  information  regarding  the  use  and  mainte-
nance  of  this  unit.  Please  keep  this  manual  with  the  unit,  for  future 
reference.

CAUTION IMPORTANT! When installing this projector, make sure 

that it is mounted in a manner that prevents the audience from 

looking  directly  into  the  beam,  and  the  beam  from  striking  the 

audience.

 Duo Scan RG  

 

 

          General Instructions

 Duo Scan RG  

 

 

             Safety Precautions

Safety Issues: This unit may “pop” the fuse if the maximum allotted 
load of 2 amps is reached.

•  To reduce the risk of electrical shock or fire, do not expose this unit
     rain or moisture.
•   Do not spill water or other liquids  into or on to your unit.
•   Do not attempt to remove or break off the ground prong from the
    electrical cord. This prong is used to reduce the risk of electrical  
   shock and fire in case of an internal short. Do not attempt to oper-
   ate this unit if the power cord has been frayed or broken.
•   Disconnect from main power before making any type of connection.
•   Do not remove the cover under any conditions. There are no user  
   serviceable parts inside.
•   Always be sure to mount this unit in an area that will allow proper  
   ventilation. Allow about 6” (15cm) between this device and a wall.
•   Do not attempt to operate this unit, if it becomes damaged.
•   This unit is intended for indoor use only, use of this product out-
   doors voids all warranties.
•   During long periods of non-use, disconnect the unit’s main power.
•   Always mount this unit in safe and stable matter.
•   Power cords should be routed so they are not likely to be walked  
   on, pinched by items placed upon or against them.
• Cleaning -The fixture should be cleaned only as recommended by  
   the manufacturer. See page 18 for cleaning details.
•   Heat -The appliance should be situated away from heat sources  
   such as radiators, heat registers, stoves, or other appliances    
   (including amplifiers) that produce heat.
•   The fixture should be serviced by qualified service personnel when:
    A.  The power-supply cord or the plug has been damaged.
    B.   Objects have fallen, or liquid has been spilled into the unit.
    C.  The unit has been exposed to rain or water.
    D.   The unit does not appear to operate normally or exhibits a
            marked change in performance.

•  10mW Green Laser & 10mW Red Laser (U.S.A.)
  30mW Green Laser & 80mW Red Laser (Europe)
•  10 Channel DMX Control
•  3 Operating Modes - Sound Active, Show Mode, & DMX Control 
•  20 Laser Patterns
•  Digital Display for Address and Function Setting
•   UC3 Controller (Not Included)
•   Run as Stand Alone unit or in a Master-Slave Configuration
•   Power Cord Daisy Chain up to 16 units max. See page 16

 Duo Scan RG  

 

 

 

                   Features

 Duo Scan RG 

            

        Warranty Registration

The Duo Scan RG carries a 90 day limited warranty. Please fill out the 
enclosed warranty card to validate your purchase. All returned service 
items  whether  under  warranty  or  not,  must  be  freight  pre-paid  and 
accompany a return authorization (R.A.) number. If the unit is under 
warranty you must provide a copy of your proof of purchase invoice. 
Please contact American DJ

®

 customer support for a R.A. number.

DANGER

VISIBLE LASER RADIATION

-AVOID DIRECT EYE EXPOSURE
LASER DIODE

WAVELENGTH : 635~650 nm

Max Output : <4.9mW

Class IIIa Laser Product

!

!

Summary of Contents for Duo Scan RG











Reviews: