![background image](http://html1.mh-extra.com/html/american-dj/dual-gem-pulse/dual-gem-pulse_user-instructions_2922693002.webp)
©
American DJ Supply
®
- www.americandj.com - Dual Gem Pulse Instruction Manual Page 4
©
American DJ Supply
®
- www.americandj.com - Dual Gem Pulse Instruction Manual Page 3
Dual Gem Pulse
Precautions
Safety Issue:
This unit may blow the breaker if the maximum allotted
load of 2 amps is reached. If the fuse needs replacement, please see
the fuse replacement guidelines on page45.
• Be sure the local power outlet match the required voltage of the
unit.
• Disconnect from main power before making any type of connection.
• Do not remove the cover under any conditions. There are no
user serviceable parts inside.
• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall.
• To reduce the risk of electrical shock or fire, do not expose this unit
rain or moisture
• This unit is intended for indoor use only, use of this product out-
doors voids all warranties.
• During long periods of non-use, disconnect the unit’s main power.
• Always mount this unit in safe and stable matter.
• Power-Cord Protection - Power-supply cords should be routed
so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to cords at
plugs, convenience receptacles, and the point where they exit from
the fixture. Do not attempt to remove or break off the ground prong
from the electrical cord. This prong is used to reduce the risk of
electrical shock and fire in case of an internal short.
• The fixture should be serviced by qualified service personnel when:
A. The power cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The fixture does not appear to operate normally or exhibits a
marked change in performance.
Dual Gem Pulse
Operation
Introduction:
The American DJ
®
Dual Gem
Pulse
is a dual output LED
moon-flower effect.
This fixture is designed for mobile DJ’s, clubs,
bands, roller rinks and any arena that requires a compact, light weight,
easy to use unit.
Power Supply:
Before plugging your unit in, be sure the source volt-
age in your area matches the required voltage for your American DJ
®
Dual Gem Pulse before attempting operation.
General Operation:
This fixture is designed to operate as a stand
alone sound active unit, there is no need of a controller. It has been
tested and there is no assembly necessary. The Dual Gem Pulse
is ready to be plugged in out of the box, there is no power switch.
When this fixture is plugged in, the units two LED panels will start to
project preset designs to the sound of an audio source via an internal
microphone. The audio sensitivity is preset at the factory for optimum
performance and is not user adjustable. The middle panel is a pulse
effect, that can be activated by the Strobe On/Off switch located at
the rear of the unit. After plugging the unit if there is no output, check
the fuse. If the fuse has not popped, please contact customer sup-
port for further instructions. This fixture features a light weight case
design and an adjustable hanging bracket.
Dual Gem Pulse
Fuse Replacement
Dual Gem Pulse
Warranty Registration
The Dual Gem Pulse carries a three year (1095 days) limited warranty.
Please fill out the enclosed warranty card to validate your purchase.
All returned service items whether under warranty or not, must be
freight pre-paid and accompany a return authorization (R.A.) number.
If the unit is under warranty you must provide a copy of your proof of
purchase invoice. Please contact American DJ
®
customer support for
a R.A. number.
Locate and remove the unit’s power cord. Once the cord has been
removed located the fuse holder located directly underneath the power
socket. Insert a flat-head screw driver into the top of the fuse holder
and gently pry out the fuse holder. Remove the bad fuse and replace
with a new one. The fuse holder has a built-in holder for a spare fuse
be sure not to confuse the spare fuse with active fuse.
Dual Gem Pulse
Features
• Includes Built-In Hanging Yoke
• Sound-Active
• Light Weight
• Strobe Effect Switch