![background image](http://html1.mh-extra.com/html/american-dj/dp-dmx-20l/dp-dmx-20l_user-instructions_2922692003.webp)
Functions and Controls Front Panel:
Functions and Controls Rear Panel:
8. Channel Fuses - Each of the four channels is protected by a 6.3A
fuse. These fuses prevent you from overloading and damaging
your pack. Be sure to always replace with the exact same type fuse.
9. Power Switch - This switxh controls the units main power.
10. Power Cord - Plug this cord into a matching power
supply for your area.
11. DMX Input - This connector accepts your DMX input signal.
12. DMX Output - This connector sends your DMX input
signal through to the next DMX device.
1. Mode Button - This button will change the paower packs
operate mode between DMX and chaser.
2. Menu Button - This button will activate the different
functions in DMX and chase modes.
3. Up Button - This button will increse the displayed value in the LCD
display.
4. Down Button - This button will decrease the displayed
value in the LCD display.
5. POWER OUTPUT - 3-prong grounded Edison output
sockets. 8 total output sockets.
6. GREEN L.E.D. Indicators - These LEDs will idicate their
relevant channel activity.
7. LCD Display - This multifunction display will detail all chase and
progrativity that pertains to the current operating mode of the pack.
Operation Modes:
The DP-DMX-20L™ has two different operating modes. This unit can be
used as a four channel chaser or as a 1, 2, or 4 channel DMX dimmer
pack. Please follow the instructions below to operate the unit in your
desired mode.
Chase Mode:
Use this operating mode only if you are planning on using your DP-
DMX-20L™ as a four channel chaser. This device has 16 built in pro-
grams, you may select any of these programs or set the pack to chase in
a random sequence of all 16 built in programs for a more dramatic light
show. You may control the speed at which the programs will chase.
1. Connect your lighting effects to the any of the eight power
sockets on the pack.
2. Use the mode button to select chase mode: Chase mode is
indicated by "PA" followed by numbers 01-16. "PA" is Programmed
Applied. If "A" appears in the LCD display you are in DMX mode,
©
American DJ Supply
®
- www.americandj.com - DP-DMX-20L Instruction Manual Page 6
©
American DJ Supply
®
- www.americandj.com - DP-DMX-20L Instruction Manual Page 5
Figure 5
American DJ
®
1
2
3
4
OUTPUT: 5A/CH, TOTAL 15A Max.
OPERATION
DISPLAY ITEMS
MODE:
MENU:
:
:
Select RECEIVE or CHASE
Select DISPLAY ITEMS
Increase DISPLAY ITEMS
Decrease DISPLAY ITEMS
TOTAL DMX CHANNELS
DMX CHANNEL
CHASE PROGRAM
CHASE SPEED
CHASE DIMMER
DMX Signal
MODE
CH1
MENU
CH2
CH3
CH4
4 CHANNEL DMX POWER PACK
DMX Signal
DMX Signal
2
4
3
7
6
5
1
8888
CH:01 CH:04
A:001 A:512
P:01 P:16
SP:01 SP:99
D:000 D:100
POWER INPUT: AC 120V~50-60Hz, 15A max.
POWER
1=Ground
2=Data-
3=Data+
WARNING:
THIS APPARATUS MUST BE EARTHED
N’OUVREZ PAS..RISQUE DE CHOCELCTRIQUE
FUSES: F6A 250V 5x20 mm
OFF
3
4
1
ON
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DMX IN
DMX OUT
1
2
3
2
1
3
2
8
12
11
9
10