background image

©

American DJ

®

  -  www.americandj.com  - Dekker LED Instruction Manual Page 10

©

American DJ

®

  -  www.americandj.com  - Dekker LED Instruction Manual Page 9

2. Now you can use the UC3 Controller (Not Included) to control vari- 

  ous functions. See below for UC3 controls. 

  Dekker LED                             Operating Instructions

Button 

Function 

STAND BY  

Open or close screen when pressing this button 

RGBW 

Auto Mix-color 

FUNCT I ON 

Sound Mode 

ST R OBE  

Open or close strobe mode when pressing this button 

 

  

Dekker LED

     

2 Channel Mode 

DMX Values & Traits

  Channel       Value 

 

       Function

        1                                                 PROGRAMS

                        1 - 26               4 COLOR FADE CHANGE

                      27 - 51               9 COLOR FADE CHANGE

                      52 - 76               4 COLOR LOOP CHANGE

                      77 - 101             9 COLOR LOOP CHANGE

                    102 - 126             STROBE 1  DIM - BRIGHT

                    127 - 151             STROBE 2  BRIGHT - DIM

                    152 - 176        STROBE 3  DIM - BRIGHT - DIM

                    177 - 201           STROBE 4 W/O DIM EFFECT

                    202 - 226             STROBE 5 WITH 9 COLOR

                    227 - 254        STROBE 6 WITH GRADUAL DIM

                         255              ALL PROGRAMS WILL CYCLE

        2                                              PROGRAM SPEED

                        1 - 254                        SLOW - FAST

                         255                           SOUND ACTIVE

Summary of Contents for Dekker LED









Reviews: