©
American DJ Supply
®
- www.americandj.com - Confusion™ Instruction Manual Page 4
©
American DJ Supply
®
- www.americandj.com - Confusion™ Instruction Manual Page 3
Confusion™
Precautions
Safety Issue:
This unit may blow a fuse if the maximum allotted load
of 5 amps is reached. If the fuse needs replacement, please see the
fuse replacement guidelines on page 5.
• Be sure the local power outlet match the required voltage of the
unit.
• Disconnect from main power before making any type of connection.
• Do not remove the cover under any conditions. There are no
user serviceable parts inside.
• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall.
• To reduce the risk of electrical shock or fire, do not expose this unit
rain or moisture
• This unit is intended for indoor use only, use of this product out
doors voids all warranties.
• During long periods of non-use, disconnect the unit’s main power.
• Always mount this unit in safe and stable matter.
• Power-Cord Protection - Power-supply cords should be routed
so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to cords at
plugs, convenience receptacles, and the point where they exit from
the fixture. Do not attempt to remove or break off the ground prong
from the electrical cord. This prong is used to reduce the risk of
electrical shock and fire in case of an internal short.
• The fixture should be serviced by qualified service personnel when:
A. The power cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The fixture does not appear to operate normally or exhibits a
marked change in performance.
Confusion™
Operation
Introduction:
The American DJ
®
Confusion
™
is a quadruple output
moon-flower effect. This unit is sound-active and has a special optional
shake function. This fixture is designed for mobile DJ’s, clubs, bands,
roller rinks and any arena that requires a compact, light weight, easy
to use unit.
Power Supply:
Before plugging your unit in, be sure the source
voltage in your area matches the required voltage for your American
DJ
®
Confusion™ before attempting operation.
General Operation:
This fixture is designed to operate as a stand
alone, sound active unit. The unit has been tested and the lamp has
been installed at the factory there is no assembly necessary. The
Confusion™ is ready to be plugged in out of the box, there is no
power switch. When this fixture is plugged in, the units four internal
dichroic colored mirrors will rotate. If the mirrors do not rotate, check
to make sure that the audio sensitivity knob at the rear is not turned
all the way counter-clockwise (less sensitive). If there is no lamp out-
put check the fuse and bulbs. If the fuse and bulbs are good, please
contact customer support for further instructions. This fixture features
an adjustable hanging bracket.
Shake Function:
This unit comes with a optional shake function,
the activation switch is located on the rear of the unit. When the
shake function is activated the units internal dichroic mirrors will
rotate and shake. There is also a optional controller that plugs into
the 1/4” jack at the rear. With this controller you can also activate the
shake function.
Confusion™
Halogen Lamp Warning
This fixture is fitted with halogen lamps which are
highly susceptible to damage if improperly handled.
Never touch the lamps with your bare fingers as
the oil from your hands will shorten lamp life. Also,
never move the fixture until the lamps have had
ample time to cool. Remember, lamps are not cov-
ered under warranty conditions.
Confusion™
Features
• Optional Shake Feature
• ZB-EHJ 24v/ 250w
• Remote Control to Activate Shake Function
• Audio Sensitivity Control
