background image

User Instructions

©

American DJ

®

 - www.americandj.com - Atmospheric RG LED Instruction Manual Page 2

Unpacking: 

Thank you for purchasing the Atmospheric RG LED 

by American DJ

®

. Every Atmospheric RG LED has been thoroughly 

tested and has been shipped in perfect operating condition. Carefully 

check the shipping carton for damage that may have occurred during 

shipping. If the carton appears to be damaged, carefully inspect your 

fixture for any damage and be sure all equipment necessary to oper-

ate the unit has arrived intact. In the event damage has been found 

or parts are missing, please contact our toll free customer support 

number for further instructions. Please do not return this unit to your 

dealer without contacting customer support first. 

Introduction: 

The Atmospheric RG LED is an incredible 2 chan-

nel DMX intelligent, red & green laser, and dark blue LED fixture. The 

unique “web type” laser combined with the LED creates a psychedelic 

atmospheric effect. The Atmospheric RG LED can operate as a stand 

alone fixture or in a Master/Slave configuration. The Atmospheric RG 

LED has three operating modes; sound active mode, show mode, or it 

can be controlled via DMX. For best results use fog or special effects 

smoke to enhance the beams projections.  

Customer Support:

 

American DJ

®

 provides a toll free customer sup-

port line, to provide set up help and  to answer any question should 

you encounter problems during your set up or initial operation. You 

may also visit us on the web at www.americandj.com for any com-

ments or suggestions. For service related issue please contact Ameri-

can DJ

®

. Service Hours are Monday through Friday 8:00 a.m. to 4:30 

p.m. Pacific Standard Time.

 

Voice:   

(800) 322-6337

 

Fax:    

(323) 582-2941

 

E-mail:  

[email protected]

To purchase parts online visit http://parts.americandj.com

Warning!

 

To prevent or reduce the risk of electrical shock or fire, do 

not expose this unit to rain or moisture. 

Caution! 

There are no user serviceable parts inside this unit. Do not 

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact 

American DJ customer support.
PLEASE recycle the shipping carton whenever possible.

  Atmospheric RG LED    

          General Introduction

   Rev. 3/14

Summary of Contents for Atmospheric RG LED











Reviews: