![background image](http://html1.mh-extra.com/html/american-dj/aggressor-tri-led/aggressor-tri-led_user-instructions_2922651002.webp)
Aggressor Tri LED™
Operation
©
American DJ
®
- www.americandj.com - Aggressor Tri LED™ Instruction Manual Page 3
©
American DJ
®
- www.americandj.com - Aggressor Tri LED™ Instruction Manual Page 4
Aggressor Tri LED™
Warranty Registration
The Aggressor Tri LED™ carries a three year (1095 days) limited war-
ranty. Please fill out the enclosed warranty card to validate your pur-
chase. All returned service items whether under warranty or not, must
be freight pre-paid and accompany a return authorization (R.A.) num-
ber. The R.A. number must be clearly written on the outside of the
return package. A brief description of the problem as well as the R.A.
number must also be written down on a piece of paper and included
in the shipping container. If the unit is under warranty, you must pro-
vide a copy of your proof of purchase invoice. You may obtain a R.A.
number by contacting customer support at (800) 322-6337.
Aggressor Tri LED™
Features
• Includes Built-In Hanging Yoke
• Sound-Active
• Light Weight
• LED Output Similar to 250W Lamp
To optimize the performance of this product, please read these
operating instructions carefully to familiarize yourself with the basic
operations of this unit. These instructions contain important safety
information regarding the use and maintenance of this unit. Please
keep this manual with the unit, for future reference.
Aggressor Tri LED™
General Instructions
Aggressor Tri LED™
Fuse Replacement
Introduction:
The American DJ
®
Aggresso
r Tri LED™
is a birght LED
moon-flower effect. This fixture is designed for mobile DJ’s, clubs,
bands, roller rinks and any arena that requires a compact, light weight,
easy to use unit.
General Operation:
This fixture is designed to operate as a stand
alone sound active unit, there is no need of a controller. It has been
tested and there is no assembly necessary. The Aggressor Tri LED™
is ready to be plugged in out of the box, there is no power switch.
Plug the unit in to a matching power outlet or into a power pack.
Light output will be immediate when the unit is powered on. The unit
must receive a sound source to operate normally. Use the sound
sensitivity knob on the rear of the unit to adjust the sound sensitivity.
Turning it clockwise will make it more sensitive to sound, turning it
counter-clockwise will make it less sensitive.
Fuse Replacement:
First unplug the power. The fuse holder is
located at the rear of the unit next to the power cord. Using a flat-
head screw driver unscrew the fuse holder. Remove the bad fuse and
replace with a new one.