2. Tap the UP button until “
NODE
” is displayed, press ENTER.
3. Tap the UP button until “
SLAV
” is displayed, press ENTER.
4. Press ENTER, the display will show “
ON/OFF
”.
5. Press the UP button to select “
ON
” to activate this unit as a
slave, or “
OFF
” to deactivate this unit.
6. Press ENTER to confirm.
7. Press EXIT/DN to return to the main menu.
RUN
With the function “RUN”, you can run the units inter-
nal program. You can set the number of steps under Step.
You can edit the individual scenes under Edit. You can run
the individual scenes either automatically “
AUTO
”, or sound-
active “
SOUN
”. The selection “
ALON
” means stand alone and
“
MAST
” means that the unit is designated as the master in
master/slave mode.
1. Access the main menu.
2. Tap the UP button until “
NODE
” is displayed, press ENTER.
3. Tap the UP button until “
RUN
” is displayed, press ENTER.
4. “
AUTO
” is displayed. If you press the UP button it will show
“
SOUN
”. Select which one you want to activate, and press
ENTER.
5. Press UP, to select “
ALON
” or “
NAST
”. Which mean stand
alone, and master/slave mode.
6. Select a mode, and press ENTER to confirm.
7. Press EXIT/DN to return to the main menu.
DISP
Display the DMX-512 value of each channel -
1. Access the main menu.
American DJ
®
- www.americandj.com - Accu Spot 250™ Instruction Manual Page 18
Accu Spot 250™
System Menu
American DJ
®
- www.americandj.com - Accu Spot 250™ Instruction Manual Page 17
Accu Spot 250™
System Menu
2. Tap the UP button until “
NODE
” is displayed, press ENTER.
3. Tap the UP button until “
DISP
” is displayed, press ENTER.
4. “
VALU
” should now be displayed, press ENTER.
5. The display should show “
D-00
”. Press the UP button in
order to select the desired channel. If you select “
D-05
” the
display will only show the DMX value of the 5th channel
6. Press ENTER to confirm.
7. Press EXIT/DN to return to the main menu.
Now the display will change as per the 5th channel DMX
value.
CLDI
Shuts off digital display after 2 minutes.
1. Access the main menu.
2. Tap the UP button until “
NODE
” is displayed, press ENTER.
3. Tap the UP button until “
DISP
” is displayed, press ENTER.
4. “
CLDI
” should now be displayed, press ENTER.
5. The display will show “
ON/OFF
”. Press the UP button to
select “
ON
” to activate this function, or “
OFF
” to deactivate this
function.
6. Press ENTER to confirm.
7. Press EXIT/DN to return to the main menu.
LAMP
MAIN MENU -
OPEN
With this function you can switch the lamp on or off
via the control board.
1. Access the main menu.
2. Tap the UP button until “
LAMP
” is displayed, press ENTER.