38B LED PRO Operating Instructions
©
American DJ Supply
®
- www.americandj.com - 38B LED PRO Instruction Manual Page 8
©
American DJ Supply
®
- www.americandj.com - 38B LED PRO Instruction Manual Page 7
38B LED PRO Operating Instructions
LED Display On/Off:
To set the LED display to turn off after 20 seconds, press and hold
the MODE button, and then press the DOWN button. When you
release the buttons the display will be off. Press any button to turn
the display on again. Be advised though that the display will turn off
automatically after 20 seconds.
To set the display to stay on at all times press and hold the MODE
button, and then press the UP button. The display will now stay on at
all times.
Operating Modes:
There are seven operating modes for the 38B LED PRO:
Color Mode:
In this mode you can choose a desired color to remain static.
1. Plug the fixture in and press the MODE button until “C.L.X” is dis-
played. “X” = a number between 0-7. The displayed number is the
projected color.
2. Press the UP or DOWN buttons to choose your desired color. 0 is
blackout, 1 is red, 2 is green, 3 is blue, 4 is purple, 5 is yellow, 6 is
cyan, and 7 is white.
Color Change Mode:
In this mode the 38B LED PRO will change through the different col-
ors.
1. Plug the fixture in and press the MODE button until “J.XX” is dis-
played. “XX” = a number between 01-99. The displayed number is
the speed of the color change.
2. Press the UP or DOWN buttons to adjust the speed of the color
change. The change speed can be adjusted from 00 - 99, 00 being
the slowest, and 31 being the fastest.
Color Fade Mode:
In this mode the 38B LED PRO will fade in and out of the different
colors.
1. Plug the fixture in and press the MODE button until “F.XX” is dis-
played. “XX” = a number between 01-99. The displayed number is
the speed of the color fade.
2. Press the UP or DOWN buttons to adjust the speed of the color
fade. The fade speed can be adjusted from 00 - 99, 00 being
the slowest, and 31 being the fastest.
Auto Mode:
1. Plug the fixture in and press the MODE button until “A--” is dis-
played. The fixture will now run color changes and color fades.
Sound Active Mode:
In this mode the 38B LED PRO will react to sound, changing and fad-
ing through the different colors.
1. Plug the fixture in and press the MODE button until “S.XX” is dis-
played. “XX” = a number between 00-31. The displayed number is
the sound sensivitiy level.
2. Pressing the UP and DOWN buttons to adjust the sound sensivity
level. The sound sensitivity can be adjusted from 00 - 31, 00 being
the least sensitive, and 31 being the most sensitive. The fixture
will now change via sound.
Master-Slave Operation:
This function will allows you to link units together to run in a Master-
Slave mode. In Master-Slave operation one unit will act as the con-
trolling unit and the others will react to the controlling units built-in
programs. Any unit can act as a Master or as a Slave however, only
one unit can be programmed to act as the “Master.”
1. Daisy chain your units via the XLR connector on the rear of
the unit. Use standard XLR microphone cables to link your
units together. Remember that the Male XLR connector is the
input and the Female XLR connector is the output. The first
unit in the chain (master) will use the female XLR connector
only. The last unit in the chain will use the male XLR
connector only.
2. Using the Master unit, choose your desired mode and connect
the “Slave” unit or units.
3. For the “Slave” unit(s) press the MODE button until “S.L.A.” is dis-
played. They will now follow the “Master” unit.
4. To run the units in a Master/Slave configuration in DMX
mode, set the Masters’ DMX address, then set the slave
unit(s) to the same DMX address.
5. On your DMX controller make sure the same number of fix-